how to reset the maintenance light in my Ford F-150 12th Generation (2009-2014)

Ford F-150 12th Generation (2009-2014)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

3 min read

420 words

Problem Statement

Learn how to reset the maintenance light on your Ford F-150 12th Generation (2009-2014) with this step-by-step guide. Quick and easy instructions included.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' and on a flat surface before performing any resets.

Symptoms

•Maintenance light illuminated on the dashboard
•Possible accompanying messages on the information display
•Vehicle may require regular servicing soon

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the engine is turned off.
2
Insert the ignition key into the ignition switch or press the 'Start' button without pressing the brake pedal (if equipped).
3
Access the odometer display by turning the ignition key to the 'On' position without starting the engine or by using the vehicle's start button.
4
Look for the 'Setup' or 'Settings' option on the dashboard display, if equipped.
5
Navigate to the 'Oil Life Reset' option using the trip/reset button on the dashboard.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Ignition key
•Notepad

Parts Required

•None required for this procedure

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the engine is turned off.
2
Insert the ignition key into the ignition switch or press the 'Start' button without pressing the brake pedal (if equipped).
3
Access the odometer display by turning the ignition key to the 'On' position without starting the engine or by using the vehicle's start button.
4
Look for the 'Setup' or 'Settings' option on the dashboard display, if equipped.
5
Navigate to the 'Oil Life Reset' option using the trip/reset button on the dashboard.

Solution

1. Preparation

Gather required tools, including the ignition key and a notepad to record any additional settings if necessary.
Ensure that the vehicle is in a secure and well-ventilated area.

2. Reset Maintenance Light

Turn on the Ignition:
- Turn the ignition to the “On” position without starting the engine or press the "Start" button while keeping the brake pedal unpressed.
Access the Odometer:
- Press the trip/reset button until the odometer is displayed.
Navigate to Oil Life:
- Press and hold the trip/reset button until "Oil Life" or "Maintenance Reset" shows on the display.
Reset the Light:
- Once "Oil Life" is displayed, release the trip/reset button and then press and hold it again until the oil life resets to 100% or the maintenance light goes off.
Turn Off the Ignition:
- Turn the ignition off and then start the engine to confirm that the maintenance light has been reset.