how to reset EPS light on Ford F-150 12th Generation (2009-2014)

Ford F-150 12th Generation (2009-2014)

Error Codes

30 minutes - 1 hour

Time

medium

Difficulty

high

Severity

3 min read

420 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to reset the EPS light on Ford F-150 12th Generation (2009-2014). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Steering

Estimated Time

30 minutes - 1 hour

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems to prevent shorts or shocks.

Symptoms

•EPS warning light illuminated on the dashboard
•Difficulty steering the vehicle
•Steering feels heavy or unresponsive
•Noise coming from the steering column
•Increased effort required to turn the steering wheel

Diagnostic Steps

1
Scan the vehicle for error codes using an OBD-II scanner to identify specific faults in the EPS system.
2
Inspect the power steering fluid level and condition, ensuring it meets the manufacturer's specifications.
3
Check the battery voltage and connections, as low voltage can affect EPS functionality.
4
Inspect the steering column and related wiring for damage or corrosion.
5
Verify the functionality of the EPS module by performing a system self-test if available.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench

Parts Required

•Power steering fluid

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle for error codes using an OBD-II scanner to identify specific faults in the EPS system.
2
Inspect the power steering fluid level and condition, ensuring it meets the manufacturer's specifications.
3
Check the battery voltage and connections, as low voltage can affect EPS functionality.
4
Inspect the steering column and related wiring for damage or corrosion.
5
Verify the functionality of the EPS module by performing a system self-test if available.

Solution

1. Preparation

Ensure the vehicle is parked on a flat surface.
Disconnect the negative battery terminal to prevent electrical shock.
Gather necessary tools and parts.

2. Check Power Steering Fluid

Locate the power steering reservoir under the hood.
Remove the cap and check the fluid level; top off with the recommended fluid type if low.
If fluid is contaminated, proceed to flush the system.

3. Reset EPS Light

Reconnect the negative battery terminal.
Turn the ignition key to the "ON" position without starting the engine.
Wait for 10 seconds, then turn the key to the "OFF" position.
Repeat this process three times.
Start the engine and check if the EPS light has turned off.

4. Test Drive

Take the vehicle for a short drive to ensure the EPS light remains off and that steering feels normal.