FAULTBASE
NEWSASKCars
© 2025 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Home/Cars/Ford/F-150/12th Generation (2009-2014)/how to reset EPS after fixing Ford F-150 steering problems

how to reset EPS after fixing Ford F-150 steering problems

Ford F-150 12th Generation (2009-2014)

Severity: highDifficulty: medium1 hour
2 min read
389 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to reset the EPS system after fixing steering problems in Ford F-150. Step-by-step guide with diagnostic procedures and repair instructions.

Component
Steering
Repair Time
1 hour

Safety Warnings

  • ⚠Disconnect the battery before working on electrical systems to prevent short circuits.

Symptoms

  • •EPS warning light illuminated on the dashboard
  • •Steering feels heavy or unresponsive
  • •Steering wheel off-center
  • •Unusual noises when turning the steering wheel
  • •Sudden loss of steering assist

Diagnostic Steps

  1. 1Verify that all steering components have been properly repaired and reconnected.
  2. 2Check for any stored error codes using an OBD-II scanner.
  3. 3Inspect the EPS fuse to ensure it is not blown.
  4. 4Ensure the steering angle sensor is correctly installed and aligned.
  5. 5Confirm that the battery voltage is within normal operating range (12.4V - 12.8V).

Solution

Solution

1. Preparation

  • Gather the necessary tools and parts.
  • Ensure the vehicle is parked on a level surface and the ignition is turned off.
  • Disconnect the negative battery terminal to reset the EPS system.

2. Reconnect Battery

  • Reconnect the negative battery terminal securely.
  • Turn the ignition key to the "On" position without starting the engine and wait for 1-2 minutes.

3. Perform EPS Reset

  • With the ignition in the "On" position, fully turn the steering wheel to the left until it stops, then fully to the right until it stops.
  • Return the steering wheel to the center position and hold for a few seconds.
  • Turn the ignition off and then back on again.

4. Test EPS Functionality

  • Start the engine and check the EPS warning light.
  • Verify that the steering feels normal and the wheel is centered.

Verification

After completing the repair, verify that the issue has been resolved:

  • Test the affected component to ensure it functions correctly
  • Check for any error codes or warning lights
  • Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • OBD-II scanner
  • Socket set
  • Torque wrench

Parts Required

  • EPS fuse (if blown)
  • Steering angle sensor (if misaligned or damaged)

Additional Information

Component

Steering

Repair Time

1 hour

Difficulty

medium

Severity

high

Tools

3 items

Parts

2 items

Related Faults

Discover similar issues

  1. what causes the catalytic converter to fail in my Ford F-150 12th Generation (2009-2014)

    P0420

    Learn how to diagnose and fix P0420 catalytic converter failure in Ford F-150 (2009-2014). Step-by-step guide with diagnostic procedures and repair in...

    Component:Exhaust System
    Symptoms
    • •Check engine light illuminated
    • •Decreased engine performance and power
    • +{count} more

  2. why does my Ford F-150 12th Generation (2009-2014) smell like burning oil

    Learn how to diagnose and fix the burning oil smell in Ford F-150 12th Generation (2009-2014). Step-by-step guide with diagnostic procedures and repai...

    Component:Engine
    Symptoms
    • •Burning oil smell inside or outside the vehicle
    • •Visible smoke from the engine bay or exhaust
    • +{count} more

  3. my Ford F-150 12th Generation (2009-2014) smells like rotten eggs what's the cause

    Learn how to diagnose and fix the rotten egg smell in Ford F-150 12th Generation. Step-by-step guide with diagnostic procedures and repair instruction...

    Component:Exhaust System
    Symptoms
    • •Strong odor resembling rotten eggs, especially during acceleration
    • •Decreased engine performance or power
    • +{count} more

  4. how to fix my Ford F-150 12th Generation (2009-2014) failing fuel pump?

    Learn how to diagnose and fix fuel pump failure in Ford F-150 12th Generation (2009-2014). Step-by-step guide with symptoms, diagnostic steps, and rep...

    Component:Fuel System
    Symptoms
    • •Engine cranks but fails to start
    • •Intermittent loss of power during acceleration
    • +{count} more

  5. my Ford F-150 12th Generation (2009-2014) won't go into gear what's the issue

    Learn how to diagnose and fix transmission issues in Ford F-150 12th Generation (2009-2014). Step-by-step guide with symptoms, diagnostics, and repair...

    Component:Transmission
    Symptoms
    • •Transmission won’t engage in any gear
    • •Grinding noise when attempting to shift
    • +{count} more

  6. my Ford F-150 12th Generation (2009-2014) runs rich what could be the cause

    Learn how to diagnose and fix a rich fuel condition in Ford F-150 12th Generation (2009-2014). Step-by-step guide with symptoms, diagnostic steps, and...

    Component:Fuel System
    Symptoms
    • •Check engine light illuminated
    • •Poor fuel economy
    • +{count} more

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation