FAULTBASE
Error CodesASKCars
© 2025 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Home/Cars/Ford/F-150/12th Generation (2009-2014)/how to fix the P0135 code on my Ford F-150 12th Generation (2009-2014)

how to fix the P0135 code on my Ford F-150 12th Generation (2009-2014)

Ford F-150 12th Generation (2009-2014)

Error Codes
Severity: mediumDifficulty: mediumError Code: P01351-2 hours
3 min read
540 words

Problem Statement

Learn how to diagnose and fix P0135 oxygen sensor heater circuit issues in Ford F-150 (2009-2014). Step-by-step guide with diagnostic procedures and repair instructions.

Error Code
P0135
Affected Component
Exhaust System
Estimated Time
1-2 hours

Safety Warnings

  • ⚠Disconnect the battery before working on electrical systems.
  • ⚠Allow the engine to cool before opening the exhaust system.

Symptoms

  • •Check engine light illuminated
  • •Poor fuel economy
  • •Rough idle or engine stalling
  • •Increased emissions
  • •Engine performance issues, such as hesitation during acceleration

Diagnostic Steps

  1. 1Scan for error codes using an OBD-II scanner to confirm the presence of P0135 and any other related codes.
  2. 2Inspect the wiring and connectors of the upstream oxygen sensor for damage, corrosion, or disconnections.
  3. 3Check the oxygen sensor heater circuit using a multimeter to verify that there is proper voltage and resistance.
  4. 4Test the oxygen sensor's functionality by performing a voltage test while the engine is running.
  5. 5Inspect the fuse related to the oxygen sensor heater circuit to ensure it is not blown.
  6. 6Check for any exhaust leaks in the vicinity of the oxygen sensor that could affect its operation.

Solution

Solution

1. Preparation

  • Gather necessary tools and parts.
  • Disconnect the negative battery terminal to prevent electrical shorts.
  • Allow the engine to cool before starting work.

2. Remove the Oxygen Sensor

  • Locate the upstream oxygen sensor (Bank 1 Sensor 1), typically found on the exhaust manifold or front pipe.
  • Use an oxygen sensor socket or wrench to carefully unscrew and remove the sensor from the exhaust system.
  • Inspect the sensor for signs of damage or contamination.

3. Inspect and Repair Wiring

  • Examine the wiring harness leading to the oxygen sensor for any signs of fraying, corrosion, or disconnection.
  • If damaged, repair or replace the affected wiring using heat-shrink connectors and electrical tape.
  • Ensure that all connections are secure and free from moisture.

4. Install New Oxygen Sensor

  • If the oxygen sensor was faulty, replace it with a new sensor.
  • Apply anti-seize compound to the threads of the new sensor (if recommended) and thread it into the exhaust system.
  • Tighten the sensor to the manufacturer's specifications (usually around 30 ft-lbs, but verify with service manual).

5. Reconnect Battery and Clear Codes

  • Reconnect the negative battery terminal.
  • Use an OBD-II scanner to clear the P0135 code and any other stored codes.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Oxygen sensor socket or wrench
  • •Multimeter
  • •Electrical repair tools (soldering iron, heat-shrink tubing, etc.)

Parts Required

  • •New upstream oxygen sensor (Bank 1 Sensor 1)
  • •Electrical connectors (if needed)

Additional Information

Error Code
P0135
Affected Component
Exhaust System
Estimated Time
1-2 hours
Difficulty
medium
Severity
medium
Tools Required
4 items
Parts Required
2 items

Related Faults

  1. how to diagnose fuel pump issues on Ford F-150 12th Generation (2009-2014)

    Learn how to diagnose and fix fuel pump issues in Ford F-150 12th Generation (2009-2014). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Fuel System6 symptoms

  2. my Ford F-150 12th Generation (2009-2014) runs rich what could be the cause

    Learn how to diagnose and fix a rich fuel condition in Ford F-150 12th Generation (2009-2014). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Fuel System6 symptoms

  3. how to bleed the brakes on a Ford F-150 12th Generation (2009-2014)

    Learn how to bleed the brakes on a Ford F-150 (2009-2014) to ensure proper brake function. Step-by-step guide with symptoms and diagnostic steps.

    Brakes5 symptoms

  4. my Ford F-150 12th Generation (2009-2014) has a smell of burning oil why

    Learn how to diagnose and fix the burning oil smell in your Ford F-150 12th Generation. Step-by-step guide with symptoms, diagnostics, and repairs.

    Engine5 symptoms

  5. why does my Ford F-150 12th Generation (2009-2014) keep throwing P0301 code

    Learn how to diagnose and fix P0301 cylinder 1 misfire in Ford F-150 12th Generation. Step-by-step guide with diagnostic procedures and repair instructions.

    P0301Engine5 symptoms

  6. my Ford F-150 12th Generation (2009-2014) won't go into gear what's the issue

    Learn how to diagnose and fix transmission issues in Ford F-150 12th Generation (2009-2014). Step-by-step guide with symptoms, diagnostics, and repair instructions.

    Transmission6 symptoms

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation