how to fix P0700 transmission code on Ford F-150 12th Generation (2009-2014)

Ford F-150 12th Generation (2009-2014)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

Error Code: P0700

3 min read

568 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0700 transmission code on Ford F-150 12th Generation. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Error Code

P0700

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems to avoid shorts.
•Allow the vehicle to cool down before working on the transmission to prevent burns.

Symptoms

•Check engine light illuminated
•Rough shifting or shifting delays
•Slipping transmission
•Transmission overheating
•Poor fuel economy
•Failure to engage into gear

Diagnostic Steps

1
Scan the vehicle's onboard computer using an OBD-II scanner to retrieve additional transmission-related trouble codes.
2
Inspect the transmission fluid level and condition; look for signs of contamination or burning.
3
Check the wiring and connectors to the Transmission Control Module (TCM) for damage or corrosion.
4
Test the TCM for proper functionality using a multimeter.
5
Inspect the transmission solenoids for proper operation by performing a resistance test.
6
Verify that there are no other underlying issues, such as engine performance problems that could affect the transmission.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Socket set
•Torque wrench
•Transmission fluid pump

Parts Required

•Transmission fluid (specific type for F-150)
•Transmission filter and gasket (if performing fluid change)
•Replacement solenoids (if necessary)
•Replacement TCM (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle's onboard computer using an OBD-II scanner to retrieve additional transmission-related trouble codes.
2
Inspect the transmission fluid level and condition; look for signs of contamination or burning.
3
Check the wiring and connectors to the Transmission Control Module (TCM) for damage or corrosion.
4
Test the TCM for proper functionality using a multimeter.
5
Inspect the transmission solenoids for proper operation by performing a resistance test.
6
Verify that there are no other underlying issues, such as engine performance problems that could affect the transmission.

Solution

1. Preparation

Gather necessary tools and parts.
Disconnect the negative battery terminal to ensure safety.
Elevate the vehicle and secure it on jack stands.

2. Check Transmission Fluid

Remove the transmission dipstick and check fluid level.
If the fluid is low, top it up with the manufacturer's recommended transmission fluid.
If the fluid is discolored or smells burnt, consider a fluid change.

3. Inspect Wiring and Connectors

Visually inspect the wiring harness and connectors to the TCM for any signs of wear, fraying, or corrosion.
Clean any corroded connections with electrical contact cleaner.
Repair or replace damaged wires or connectors as needed.

4. Test the Transmission Control Module (TCM)

Use a multimeter to check the electrical signals sent to and from the TCM.
If the TCM is found to be faulty, remove and replace it:
- Unscrew and disconnect the TCM from its mounting location.
- Install the new TCM and reconnect the wiring harness.

5. Inspect Transmission Solenoids

Remove the transmission pan to access the solenoids.
Disconnect the electrical connectors from the solenoids and perform a resistance test.
Replace any solenoids that do not meet the manufacturer's specifications.

6. Reassemble and Refill

Reinstall the transmission pan with a new gasket if necessary.
Refill the transmission with the correct type and amount of fluid.
Reconnect the negative battery terminal.