why does my Ford Explorer Sixth Generation (2020-present) vibrate at high speeds

Ford Explorer Sixth Generation (2020-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

421 words

Problem Statement

Learn how to diagnose and fix vibrations at high speeds in Ford Explorer (2020-present). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the vehicle to cool before working on brake components.

Symptoms

•Vibrations felt through the steering wheel
•Increased noise level at high speeds
•Premature tire wear
•Unstable handling during acceleration
•Check tire pressure warning light may illuminate

Diagnostic Steps

1
Inspect tire condition for uneven wear or damage.
2
Check tire balance using a tire balancer machine.
3
Examine wheel alignment with an alignment tool.
4
Inspect suspension components (bushings, shocks, struts) for wear or damage.
5
Test drive the vehicle to replicate vibrations and assess severity.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Hydraulic jack
•Jack stands
•Socket set
•Tire balancer
•Wheel alignment tool

Parts Required

•Tires (if replacement is necessary)
•Suspension components (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a level surface.
Raise the vehicle using a hydraulic jack and secure it with jack stands.

2. Inspect and Replace Tires

Inspect Tires:
- Check for uneven wear and damage.
- Measure tire pressure and adjust to manufacturer's specifications.
Replace Tires (if necessary):
- Remove the wheel using a socket set.
- Install new tires, ensuring proper orientation and torque lug nuts to the manufacturer’s specifications (usually 100-120 ft-lbs).

3. Balance and Align Wheels

Balance Tires:
- Mount each wheel on a tire balancer.
- Add weights as needed to achieve balance.
Align Wheels:
- Use a wheel alignment tool to adjust camber, caster, and toe to the specifications provided in the vehicle's service manual.

4. Inspect Suspension Components

Visual Inspection:
- Check all suspension components for signs of wear or damage, including bushings, shocks, and struts.
Replace Damaged Components:
- Use appropriate tools to remove and replace worn parts as needed, following manufacturer guidelines for torque specifications during reassembly.