why does my Ford Explorer Sixth Generation (2020-present) vibrate at high speeds

Ford Explorer Sixth Generation (2020-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

490 words

Problem Statement

Learn how to diagnose and fix vibrations at high speeds in Ford Explorer (2020-present). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on electrical systems.
•Allow the vehicle to cool before performing any inspections or repairs.

Symptoms

•Vibration felt through the steering wheel
•Body shake noticeable in the cabin
•Increased noise at high speeds
•Steering wheel may pull to one side
•Uneven tire wear observed

Diagnostic Steps

1
Inspect tire condition and pressure for any abnormalities.
2
Check wheel balance by using a balancer machine.
3
Examine suspension components for wear or damage.
4
Inspect the driveshaft and universal joints for play or damage.
5
Test the alignment settings and adjust if necessary.
6
Scan for any trouble codes related to the vehicle's stability control system.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Floor jack
•Jack stands
•Tire pressure gauge
•Tire balancing machine
•Alignment tool
•Torque wrench

Parts Required

•Tires (if necessary)
•Suspension components (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect tire condition and pressure for any abnormalities.
2
Check wheel balance by using a balancer machine.
3
Examine suspension components for wear or damage.
4
Inspect the driveshaft and universal joints for play or damage.
5
Test the alignment settings and adjust if necessary.
6
Scan for any trouble codes related to the vehicle's stability control system.

Solution

1. Preparation

Tools Required: Floor jack, jack stands, tire pressure gauge, tire balancing machine, alignment tool, torque wrench.
Ensure the vehicle is parked on a level surface and the engine is off.
Wear safety gloves and goggles.

2. Tire Inspection

Sub-steps:
1. Check tire pressure using a tire pressure gauge. Inflate to manufacturer specifications if needed.
2. Inspect tires for bulges, cuts, or uneven tread wear.
3. Rotate tires if they are unevenly worn.

3. Wheel Balancing

Sub-steps:
1. Remove the wheels from the vehicle using a floor jack and jack stands.
2. Mount the wheels on a tire balancing machine.
3. Adjust weights on the wheel as needed to achieve proper balance.
4. Reinstall the wheels and torque lug nuts to manufacturer specifications.

4. Suspension and Drivetrain Inspection

Sub-steps:
1. Visually inspect all suspension components, such as control arms, bushings, and shocks for wear and damage.
2. Check the driveshaft for proper alignment and inspect universal joints for any play.
3. Replace any worn or damaged components as needed.

5. Wheel Alignment

Sub-steps:
1. Use an alignment tool to check the vehicle's alignment settings.
2. Adjust the camber, caster, and toe angles as necessary to meet manufacturer specifications.
3. Test drive the vehicle to ensure that the steering wheel is centered and the vehicle tracks correctly.