what does error code C0035 mean for Ford Explorer Sixth Generation (2020-present)

Solution

1. Preparation

• Tools Required: OBD-II scanner, multimeter, socket set, torque wrench, and safety goggles.
• Safety Warnings: Disconnect the battery before working on electrical systems; allow components to cool down if the vehicle has been running.

2. Inspect and Replace Wheel Speed Sensor

1. Lift the Vehicle:

   • Use a jack to lift the front of the vehicle and secure it with jack stands.

2. Remove the Wheel:

   • Use a socket set to remove the lug nuts and take off the left front wheel.

3. Access the Wheel Speed Sensor:

   • Locate the wheel speed sensor on the left front wheel assembly. It is typically mounted on the hub assembly.

4. Disconnect the Sensor:

   • Carefully disconnect the wiring harness from the wheel speed sensor.

5. Remove the Old Sensor:

   • Remove the mounting bolt(s) holding the sensor in place, using the socket set.

6. Install the New Sensor:

   • Position the new wheel speed sensor in place and secure it with the mounting bolt(s). Torque to manufacturer specifications.

7. Reconnect the Wiring:

   • Reattach the wiring harness to the new wheel speed sensor, ensuring it clicks into place securely.

3. Reassemble and Test

1. Reinstall the Wheel:

   • Put the wheel back on and hand-tighten the lug nuts.

2. Lower the Vehicle:

   • Carefully remove the jack stands and lower the vehicle to the ground.

3. Torque the Lug Nuts:

   • Use a torque wrench to tighten the lug nuts to the manufacturer’s specifications in a crisscross pattern.

4. Reconnect the Battery:

   • Reconnect the battery terminal securely.

5. Clear Codes and Test Drive:

   • Use the OBD-II scanner to clear the C0035 code and perform a test drive to verify the repair.