what could cause a vibration in my Ford Explorer Sixth Generation (2020-present) at high speeds

Ford Explorer Sixth Generation (2020-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

467 words

Problem Statement

Learn how to diagnose and fix vibrations at high speeds in Ford Explorer Sixth Generation. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Wear safety goggles and gloves during the process.
•Always disconnect the battery before performing any electrical work.
•Ensure the vehicle is securely lifted and supported before working underneath it.

Symptoms

•Vibration felt through the steering wheel
•Shaking of the vehicle body
•Vibration intensity increases with speed
•Uneven tire wear
•Steering wheel pulls to one side

Diagnostic Steps

1
Inspect tire condition for uneven wear or damage.
2
Check tire pressure and adjust to manufacturer's specifications.
3
Perform a wheel balance check on all four tires.
4
Inspect wheel alignment using alignment equipment.
5
Examine suspension components for wear or damage.
6
Check for loose or damaged drivetrain components.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Wheel balancing machine
•Alignment equipment
•Jack and jack stands

Parts Required

•Replacement tires (if necessary)
•Suspension components (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect tire condition for uneven wear or damage.
2
Check tire pressure and adjust to manufacturer's specifications.
3
Perform a wheel balance check on all four tires.
4
Inspect wheel alignment using alignment equipment.
5
Examine suspension components for wear or damage.
6
Check for loose or damaged drivetrain components.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a level surface and engage the parking brake.
Safety warning: Wear safety goggles and gloves during the process.

2. Inspect and Replace Tires (if necessary)

Sub-steps:
1. Remove the lug nuts using a socket wrench and take off the wheel.
2. Inspect the tire for bulges, cuts, or uneven wear.
3. If damage is found, replace the tire with a new one.
4. Reinstall the wheel and torque the lug nuts to the manufacturer’s specifications (usually 100-150 lb-ft).

3. Wheel Balancing

Sub-steps:
1. Mount the wheel on a balancing machine.
2. Adjust weights on the rim until the wheel is balanced.
3. Repeat for all four wheels.

4. Wheel Alignment

Sub-steps:
1. Use alignment equipment to check the alignment angles (caster, camber, toe).
2. Adjust the alignment according to manufacturer specifications.
3. Test drive the vehicle to ensure proper alignment.

5. Inspect Suspension and Drivetrain

Sub-steps:
1. Lift the vehicle and visually inspect the suspension components (shocks, struts, control arms) for damage.
2. Check for any loose bolts or broken bushings.
3. Inspect the driveshaft and CV joints for wear or damage.
4. Replace any damaged components as required.