what causes the Ford Explorer Sixth Generation (2020-present) to lose power while driving?

Ford Explorer Sixth Generation (2020-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

512 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix loss of power issues in Ford Explorer Sixth Generation (2020-present). Step-by-step guide with symptoms and solutions.

Affected Component

Engine

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before opening the hood to prevent burns.

Symptoms

•Engine hesitation during acceleration
•Sudden drops in engine power
•Illuminated check engine light
•Unusual engine noises (e.g., knocking or pinging)
•Poor fuel economy
•Transmission slipping or harsh shifting

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any stored diagnostic trouble codes (DTCs).
2
Check the fuel system for adequate pressure and inspect fuel filter and fuel pump functionality.
3
Inspect the air intake system for blockages or leaks, including the air filter and intake manifold.
4
Examine the throttle body for carbon buildup or mechanical failure.
5
Test the ignition system components (spark plugs, ignition coils) for proper operation.
6
Inspect the exhaust system for blockages or excessive back pressure, particularly in the catalytic converter.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Fuel pressure gauge
•Throttle body cleaner
•Socket set
•Multimeter
•Torque wrench
•Screwdrivers

Parts Required

•Fuel filter
•Fuel pump (if needed)
•Air filter
•Spark plugs
•Ignition coils (if needed)
•Catalytic converter (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any stored diagnostic trouble codes (DTCs).
2
Check the fuel system for adequate pressure and inspect fuel filter and fuel pump functionality.
3
Inspect the air intake system for blockages or leaks, including the air filter and intake manifold.
4
Examine the throttle body for carbon buildup or mechanical failure.
5
Test the ignition system components (spark plugs, ignition coils) for proper operation.
6
Inspect the exhaust system for blockages or excessive back pressure, particularly in the catalytic converter.

Solution

1. Preparation

Gather necessary tools and parts.
Disconnect the battery to ensure safety during repairs.

2. Address Fuel System Issues

Sub-steps:
1. Check fuel pressure using a fuel pressure gauge. Ensure it is within the manufacturer's specifications.
2. Replace the fuel filter if it is clogged or hasn’t been replaced according to schedule.
3. If the fuel pump is malfunctioning, replace it with a new unit.

3. Clean or Repair Air Intake System

Sub-steps:
1. Remove the air filter and inspect for dirt or damage; replace if necessary.
2. Clean the throttle body using throttle body cleaner to remove carbon buildup.
3. Inspect and replace any damaged hoses leading to the intake manifold.

4. Inspect and Replace Ignition Components

Sub-steps:
1. Remove spark plugs, inspect for wear, and replace if necessary (use OEM specifications for type).
2. Test ignition coils with a multimeter; replace any that are outside of the specified resistance range.

5. Examine Exhaust System

Sub-steps:
1. Inspect the exhaust for any visible damage or leaks.
2. Check the catalytic converter for blockages; if found, replace the catalytic converter.

Tools Required:

OBD-II scanner
Fuel pressure gauge
Throttle body cleaner
Socket set
Multimeter
Torque wrench
Screwdrivers

Parts Required:

Fuel filter
Fuel pump (if needed)
Air filter
Spark plugs
Ignition coils (if needed)
Catalytic converter (if needed)

Estimated Repair Time: 2-4 hours

Safety Warnings:

Disconnect the battery before working on electrical systems.
Allow the engine to cool before opening the hood to prevent burns.