Signs of a Failing Engine Mount in the Ford Explorer Sixth Generation (2020-present) (U625)

Engine mounts are crucial components that secure the engine to the vehicle's frame and absorb vibrations. A failing engine mount can lead to various symptoms that can affect vehicle performance and comfort. Here are the common signs of a failing engine mount in the Ford Explorer Sixth Generation:

Tools Required

• Wrench Set: For tightening or loosening engine mount bolts.
• Screwdriver Set: For removing any panels or components obstructing access to the engine mounts.
• Jack and Jack Stands: To safely lift and secure the vehicle if undercarriage access is required.
• Torque Wrench: To ensure proper tightening of engine mount bolts.
• Pry Bar: For testing engine movement (if necessary).
• Flashlight: For better visibility during inspection.

Repair Instructions

Step 1: Safety Preparation

1. Park the vehicle on a flat surface and engage the parking brake.
2. Disconnect the negative battery terminal to prevent electrical issues.

Step 2: Inspect the Engine Mounts

1. Raise the vehicle using a jack and secure it with jack stands.
2. Visually inspect the engine mounts for cracks, tears, or signs of wear.
3. If hydraulic mounts are present, check for fluid leaks.

Step 3: Remove the Engine Mount

1. Use a wrench to remove the bolts securing the engine mount to the engine block and frame.
2. Carefully lift the engine slightly using a hoist or jack to relieve pressure from the mount.
3. Remove the old engine mount from its position.

Step 4: Install the New Engine Mount

1. Position the new engine mount into place.
2. Lower the engine gently onto the new mount, aligning the holes for the bolts.
3. Tighten the bolts to the manufacturer's recommended torque specifications using a torque wrench.

Step 5: Recheck Engine Position and Components

1. Ensure that all components are aligned properly and that there is no excessive engine movement.
2. Reconnect the negative battery terminal.

Step 6: Final Testing

1. Start the engine and observe for vibrations and noises.
2. Test drive the vehicle to ensure proper performance and comfort.

By following these steps, you can effectively diagnose and replace a failing engine mount in a Ford Explorer Sixth Generation, ensuring the longevity and performance of the vehicle.