FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Ford Explorer’s brake pedal goes to the floor what causes that - Ford Explorer
Home/Cars/Ford/Explorer/Sixth Generation (2020-present)/my Ford Explorer’s brake pedal goes to the floor what causes that

my Ford Explorer’s brake pedal goes to the floor what causes that

Ford Explorer Sixth Generation (2020-present)

Error Codes
2-4 hours
Time
medium
Difficulty
critical
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
587 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix the brake pedal going to the floor in Ford Explorer. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Brakes
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Always disconnect the battery before working on electrical systems or components.
  • •Allow the vehicle to cool before opening any brake fluid reservoirs.

Symptoms

  • •Brake pedal feels soft or spongy
  • •Brake warning light illuminated on the dashboard
  • •Loss of braking power or difficulty stopping
  • •Fluid leaks around the brake components
  • •Unusual noises when pressing the brake pedal

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Brake bleeder kit
  • •Socket set
  • •Wrench set
  • •Jack and jack stands
  • •Torque wrench

Parts Required

  • •Brake fluid (DOT 3 or DOT 4)
  • •Brake pads
  • •Brake rotors
  • •Brake lines or calipers (if damaged)

Additional Information

Affected Component
Brakes
Estimated Time
2-4 hours
Difficulty
medium
Severity
critical
Tools Required
6 items
Parts Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Ensure the vehicle is parked on a level surface and engage the parking brake.
  • Wear safety goggles and gloves for protection.
2. Inspect and Replace Brake Fluid
  • Tools Required: Brake fluid, funnel, rag.
  • Check the brake fluid level; if low, top off with the manufacturer-recommended brake fluid type (DOT 3 or DOT 4).
  • If the fluid appears contaminated, perform a complete brake fluid flush.
    • Use a brake bleeder kit or gravity bleed method to replace the old fluid.
3. Repair or Replace Damaged Components
  • Tools Required: Wrench set, socket set, brake line wrench.
  • If leaks are found, replace damaged brake lines, calipers, or wheel cylinders.
    • Remove the damaged component using the appropriate wrench size.
    • Install the new component, ensuring to torque to manufacturer specifications (refer to service manual).
    • Bleed the brakes after replacement to eliminate air from the system.
4. Inspect and Replace Brake Pads and Rotors (if necessary)
  • Tools Required: Jack and jack stands, lug wrench, brake caliper tool.
  • Lift the vehicle and remove the wheel.
  • Inspect the brake pads and rotors for wear; replace if pads are less than 3mm thick or rotors are warped.
    • Remove the caliper and bracket to access pads.
    • Replace pads and reassemble components, ensuring proper torque specifications.
5. Test Brake System
  • After all repairs are made, perform a brake system test.
  • Pump the brake pedal several times to build pressure and ensure the pedal feels firm.
  • Test the vehicle in a safe area to verify proper brake function.