my Ford Explorer Sixth Generation (2020-present) has poor acceleration after a certain speed why

Ford Explorer Sixth Generation (2020-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

539 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix poor acceleration issues in Ford Explorer Sixth Generation (2020-present). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Engine

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool down before inspecting any components.

Symptoms

•Check engine light illuminated
•Noticeable loss of power when accelerating
•Engine stalling at higher speeds
•Poor fuel economy
•Increased emissions
•Unusual noises from the engine or transmission

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any stored trouble codes.
2
Inspect the air intake system for blockages or leaks that could affect airflow.
3
Check the fuel system pressure using a fuel pressure gauge to ensure proper fuel delivery.
4
Inspect the throttle body for carbon buildup or mechanical issues affecting throttle response.
5
Evaluate transmission fluid levels and condition to rule out transmission issues.
6
Test the ignition system components, including spark plugs and coils, for proper operation.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Throttle body cleaner
•Fuel pressure gauge
•Socket set
•Torque wrench

Parts Required

•Fuel filter (if needed)
•Spark plugs (if needed)
•Throttle body gasket (if removed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any stored trouble codes.
2
Inspect the air intake system for blockages or leaks that could affect airflow.
3
Check the fuel system pressure using a fuel pressure gauge to ensure proper fuel delivery.
4
Inspect the throttle body for carbon buildup or mechanical issues affecting throttle response.
5
Evaluate transmission fluid levels and condition to rule out transmission issues.
6
Test the ignition system components, including spark plugs and coils, for proper operation.

Solution

1. Preparation

Gather all necessary tools and parts.
Ensure the vehicle is parked on a level surface and the engine is cool.
Disconnect the battery to prevent electrical shorts.

2. Inspect and Clean the Throttle Body

Remove the air intake duct to access the throttle body.
Use throttle body cleaner and a soft cloth to clean the inside of the throttle body.
Ensure the throttle plate operates smoothly without sticking.
Reinstall the air intake duct securely.

3. Fuel System Inspection

Remove the fuel pump relay to relieve fuel system pressure.
Connect a fuel pressure gauge to the fuel rail.
Turn the ignition to the "ON" position (do not start the engine) and check the pressure; it should be within manufacturer specifications.
If pressure is low, inspect the fuel filter for clogs and replace if necessary.

4. Transmission Fluid Check

Locate the transmission dipstick and remove it.
Wipe the dipstick clean, then reinsert and remove it again to check fluid level and condition.
If the fluid is low or burnt, consider performing a transmission fluid change.

5. Ignition System Check

Remove the ignition coils and inspect for cracks or damage.
Check spark plugs for wear or fouling; replace if necessary.
Reinstall ignition coils ensuring they are securely seated.