my Ford Explorer shakes when I accelerate what's wrong

Ford Explorer Sixth Generation (2020-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

467 words

Problem Statement

Learn how to diagnose and fix shaking during acceleration in Ford Explorer. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the vehicle to cool before performing any maintenance.

Symptoms

•Engine vibration during acceleration
•Steering wheel shakes
•Loss of power during acceleration
•Unusual noises (clunking or grinding) while accelerating
•Vibration felt in the vehicle's seats or floor

Diagnostic Steps

1
Inspect for visible damage or wear on tires and wheels.
2
Check tire pressure and balance.
3
Scan for any error codes using an OBD-II scanner.
4
Inspect the drivetrain components, including the driveshaft and CV joints.
5
Examine suspension components, such as control arms and bushings.
6
Test the engine and transmission mounts for wear.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Tire pressure gauge
•Jack
•Jack stands
•Socket set
•Torque wrench
•Lug wrench
•Pry bar

Parts Required

•Tires (if damaged)
•Driveshaft assembly (if worn)
•CV joints (if damaged)
•Suspension components (bushings, control arms, etc.)
•Engine and transmission mounts (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect for visible damage or wear on tires and wheels.
2
Check tire pressure and balance.
3
Scan for any error codes using an OBD-II scanner.
4
Inspect the drivetrain components, including the driveshaft and CV joints.
5
Examine suspension components, such as control arms and bushings.
6
Test the engine and transmission mounts for wear.

Solution

1. Preparation

Gather tools and parts required for the repair.
Ensure the vehicle is parked on a flat surface and secure it with wheel chocks.
Disconnect the battery to ensure safety while working on electrical components.

2. Inspect Tires and Wheels

Tools Required: Tire pressure gauge, jack, jack stands, and lug wrench.
Check tire pressure and inflate if necessary to the manufacturer's specifications.
Remove the wheels and inspect for any damage or bent rims. Replace if needed.

3. Examine Drivetrain Components

Tools Required: Socket set and torque wrench.
Inspect the driveshaft for any signs of wear, such as u-joint play or damage. Replace if necessary.
Check CV joints for any boot tears or grease leaks. Replace if damaged.

4. Check Suspension Components

Tools Required: Socket set and pry bar.
Inspect control arms, bushings, and strut mounts for wear or damage. Replace any worn components.
Ensure that all bolts are properly torqued to the manufacturer's specifications.

5. Test Engine and Transmission Mounts

Tools Required: Socket set and pry bar.
Inspect engine and transmission mounts for signs of cracking or excessive wear. Replace if necessary.