FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Ford Explorer has low oil pressure warning light on, what does it mean? - Ford Explorer
Home/Cars/Ford/Explorer/Sixth Generation (2020-present)/my Ford Explorer has low oil pressure warning light on, what does it mean?

my Ford Explorer has low oil pressure warning light on, what does it mean?

Ford Explorer Sixth Generation (2020-present)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
623 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix low oil pressure warning in Ford Explorer. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Engine
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before opening the oil system to prevent burns.

Symptoms

  • •Low oil pressure warning light illuminated on the dashboard
  • •Engine noise, such as knocking or ticking sounds
  • •Oil leaks visible on the ground or under the vehicle
  • •Decreased engine performance
  • •Overheating engine

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Oil filter wrench
  • •Drain pan
  • •Socket set
  • •Torque wrench
  • •External oil pressure gauge

Parts Required

  • •Engine oil (recommended type)
  • •Oil filter
  • •Oil drain plug gasket (if necessary)
  • •Oil pump (if necessary)

Additional Information

Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
6 items
Parts Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Ensure the vehicle is parked on a level surface and the engine is off.
  • Disconnect the battery to ensure safety.
2. Check and Top Off Engine Oil
  • Locate the oil fill cap and remove it.
  • Use a funnel to add the appropriate type and amount of oil as specified in the owner’s manual.
  • Replace the oil fill cap securely.
3. Replace Oil Filter
  • Tools Required: Oil filter wrench, drain pan
  • Place the drain pan under the oil filter to catch any oil.
  • Use the oil filter wrench to remove the old filter, making sure to clean the mounting surface.
  • Apply a thin layer of oil to the rubber gasket of the new oil filter, then install it by hand until snug.
  • Tighten the filter according to the manufacturer’s specifications.
4. Replace Engine Oil
  • Tools Required: Socket set, drain pan
  • Place the drain pan under the oil pan and remove the drain plug using the socket set.
  • Allow the old oil to completely drain into the pan.
  • Replace the drain plug and tighten it to the manufacturer’s torque specifications.
  • Refill the engine with the correct type and amount of oil.
5. Inspect and Replace Oil Pump (if necessary)
  • Tools Required: Socket set, torque wrench
  • If the oil pressure remains low, remove the oil pan to access the oil pump.
  • Disconnect the oil pump from the engine and remove it for inspection.
  • Replace the oil pump if it shows signs of wear or damage.
  • Reassemble the oil pan, ensuring proper gasket sealing and torque specifications.