FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Ford Explorer has low oil pressure warning light on what could it mean - Ford Explorer
Home/Cars/Ford/Explorer/Sixth Generation (2020-present)/my Ford Explorer has low oil pressure warning light on what could it mean

my Ford Explorer has low oil pressure warning light on what could it mean

Ford Explorer Sixth Generation (2020-present)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
578 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix low oil pressure warning in Ford Explorer. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Engine
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect battery before working on electrical systems.
  • •Allow engine to cool before opening oil pan or performing any oil-related work.

Symptoms

  • •Low oil pressure warning light illuminated on the dashboard
  • •Engine noise, especially a ticking or knocking sound
  • •Oil leaks under the vehicle
  • •Poor engine performance or stalling
  • •Overheating engine

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Oil filter wrench
  • •Multimeter
  • •Mechanical oil pressure gauge
  • •Torque wrench

Parts Required

  • •Engine oil (correct type and amount)
  • •Oil filter
  • •Oil drain plug gasket (if needed)
  • •Oil pressure sending unit (if faulty)

Additional Information

Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
6 items
Parts Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Ensure the vehicle is on a flat surface, and the engine is cool.
  • Disconnect the battery for safety.
2. Change Engine Oil and Filter

  1. Drain Old Oil

    • Place a drain pan under the oil pan.
    • Remove the oil drain plug using a socket wrench.
    • Allow the oil to fully drain.

  2. Replace Oil Filter

    • Locate the oil filter and use an oil filter wrench to remove it.
    • Lubricate the rubber gasket on the new oil filter with fresh oil.
    • Install the new oil filter by hand until snug, then tighten it slightly more (do not overtighten).

  3. Add New Oil

    • Reinstall the drain plug and tighten to the manufacturer’s torque specification.
    • Pour the appropriate amount and type of new oil into the engine through the oil fill cap.
    • Replace the oil fill cap securely.
3. Inspect Oil Pressure Sending Unit

  1. Locate the Sending Unit

    • Refer to the vehicle’s service manual to find the oil pressure sending unit.

  2. Check Electrical Connection

    • Inspect the wiring and connector for damage or corrosion.
    • Clean or repair any issues found.

  3. Test Sending Unit

    • Use a multimeter to test the sending unit's resistance.
    • Replace the sending unit if it is faulty.
4. Check Oil Pump

  1. Remove Oil Pan

    • Drain oil if not already done.
    • Remove the oil pan bolts and carefully lower the oil pan.

  2. Inspect Oil Pump

    • Examine the oil pump for wear and proper operation.
    • If damaged, remove the oil pump and replace it.