how to resolve the lane assist not working in Ford Explorer Sixth Generation (2020-present)?

Ford Explorer Sixth Generation (2020-present)

Error Codes

1-2 hours

Time

medium

Difficulty

high

Severity

3 min read

551 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix lane assist issues in Ford Explorer Sixth Generation (2020-present). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Electrical

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems to prevent shock or shorts.

Symptoms

•Lane assist warning light illuminated on the dashboard
•Lane keeping assist feature not activating
•Steering wheel does not provide corrective input when drifting out of lane
•Inconsistent lane detection during driving
•Warning messages displayed on the infotainment system

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any related trouble codes.
2
Check the calibration of the lane assist system using the vehicle's diagnostic tools.
3
Inspect the front-facing camera and radar sensors for obstructions (like dirt or debris).
4
Verify the steering angle sensor is functioning properly by checking its readings.
5
Ensure lane markings on the road are clear and visible during testing.
6
Check for any recent software updates or recalls related to the lane assist system.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Microfiber cloth
•Diagnostic tool for calibration
•Torque wrench

Parts Required

•Steering angle sensor (if replacement is necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any related trouble codes.
2
Check the calibration of the lane assist system using the vehicle's diagnostic tools.
3
Inspect the front-facing camera and radar sensors for obstructions (like dirt or debris).
4
Verify the steering angle sensor is functioning properly by checking its readings.
5
Ensure lane markings on the road are clear and visible during testing.
6
Check for any recent software updates or recalls related to the lane assist system.

Solution

1. Preparation

Gather the necessary tools and parts.
Ensure the vehicle is parked on a level surface.
Disconnect the battery to prevent any electrical shorts while working.

2. Clean Sensors and Camera

Use a microfiber cloth to clean the front-facing camera and radar sensors located on the windshield and grille.
Inspect the area for any physical damage or misalignment.

3. Recalibrate the Lane Assist System

Reconnect the battery after cleaning.
Follow the manufacturer’s specific calibration procedure, usually found in the service manual, which may involve driving the vehicle in a straight line for a certain distance.
Use the diagnostic tool to confirm the system is recalibrated correctly.

4. Update Software

Connect the vehicle to a Ford-approved diagnostic tool.
Check for available software updates for the lane assist system and apply them as necessary.

5. Replace Faulty Components (if needed)

If any faulty components were identified during diagnostics (e.g., steering angle sensor), follow these steps:
- Remove Component: Disconnect the battery, then remove any covers or panels necessary to access the sensor.
- Inspect and Clean: Check the connections for corrosion and clean if necessary.
- Install New Component: Replace with a new sensor, ensuring it is securely fastened and connected.
- Reconnect Battery: Reconnect the battery and test the system again.