how to reset transmission fluid change light on Ford Explorer Sixth Generation (2020-present)

Ford Explorer Sixth Generation (2020-present)

Error Codes

15-30 minutes

Time

easy

Difficulty

medium

Severity

2 min read

394 words

Problem Statement

Learn how to reset the transmission fluid change light on a 2020-present Ford Explorer. Step-by-step guide with diagnostic steps and safety tips.

Affected Component

Transmission

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' and the parking brake is engaged before performing any resets.

Symptoms

•Transmission fluid change light illuminated
•Warning message displayed on the dashboard
•Vehicle shifting issues may occur if fluid is not changed

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the engine is turned off.
2
Insert the key into the ignition and turn it to the 'On' position without starting the engine.
3
Wait for the dashboard lights to illuminate and then observe if the transmission fluid change light is still active.
4
If applicable, consult the owner's manual for specific reset instructions based on the model's features.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Vehicle owner's manual

Parts Required

•Transmission Fluid

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the engine is turned off.
2
Insert the key into the ignition and turn it to the 'On' position without starting the engine.
3
Wait for the dashboard lights to illuminate and then observe if the transmission fluid change light is still active.
4
If applicable, consult the owner's manual for specific reset instructions based on the model's features.

Solution

1. Preparation

Gather necessary tools: OBD-II scanner (if required), vehicle owner's manual.
Ensure the vehicle is in a safe, well-ventilated area.

2. Access the Vehicle's Settings

Turn the ignition key to the "On" position without starting the engine.
Wait for all dashboard lights to illuminate.
On the infotainment screen, navigate to the "Settings" menu using the touch screen.

3. Reset the Transmission Fluid Change Light

Select the "Vehicle" option from the settings menu.
Scroll to the "Maintenance" or "Service" section.
Look for "Transmission Fluid Change" in the list of maintenance items.
Select the option and confirm the reset when prompted.

4. Verify the Reset

Turn off the ignition and wait a few seconds.
Turn the ignition back to the "On" position.
Check if the transmission fluid change light is no longer illuminated.