how to reset the transmission fluid light on Ford Explorer Sixth Generation (2020-present)?

Ford Explorer Sixth Generation (2020-present)

Error Codes

15-30 minutes

Time

easy

Difficulty

medium

Severity

3 min read

410 words

Problem Statement

Learn how to reset the transmission fluid light on Ford Explorer (2020-present). Step-by-step guide with diagnostic steps and safety tips.

Affected Component

Transmission

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is securely parked and the engine is off before performing any procedures.

Symptoms

•Transmission fluid light illuminated on the dashboard
•Potentially delayed or rough shifting if fluid is low or dirty
•Transmission overheating warning may appear
•Warning messages related to transmission performance

Diagnostic Steps

1
Check the transmission fluid level using the dipstick to ensure it is at the proper level.
2
Inspect the transmission fluid condition for contamination or burning smell.
3
Verify if any diagnostic trouble codes (DTCs) are present using an OBD-II scanner.
4
Confirm that the transmission fluid has been changed (if applicable) and is at the correct specification.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner

Parts Required

•Transmission Fluid

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the transmission fluid level using the dipstick to ensure it is at the proper level.
2
Inspect the transmission fluid condition for contamination or burning smell.
3
Verify if any diagnostic trouble codes (DTCs) are present using an OBD-II scanner.
4
Confirm that the transmission fluid has been changed (if applicable) and is at the correct specification.

Solution

1. Preparation

Gather necessary tools and equipment.
Ensure the vehicle is parked on a level surface.
Turn off the engine and remove the key from the ignition.

2. Resetting the Transmission Fluid Light

Turn on the Ignition:
- Insert the key or press the start button without starting the engine (accessory mode).
Access the Vehicle Settings:
- Use the steering wheel controls to navigate to the "Settings" menu on the instrument cluster display.
Select ‘Vehicle Settings’:
- Scroll through the menu and select ‘Vehicle Settings’.
Locate the Transmission Fluid Reset Option:
- Find the option labeled ‘Transmission Fluid Reset’ or similar.
Confirm the Reset:
- Follow the prompts to confirm the reset. The screen should indicate that the transmission fluid light reset is successful.

3. Final Steps

Turn off the ignition and remove the key.
Start the engine and check that the transmission fluid light is no longer illuminated.