FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the transmission fluid change light in my Ford Explorer Sixth Generation (2020-present) - Ford Explorer
Home/Cars/Ford/Explorer/Sixth Generation (2020-present)/how to reset the transmission fluid change light in my Ford Explorer Sixth Generation (2020-present)

how to reset the transmission fluid change light in my Ford Explorer Sixth Generation (2020-present)

Ford Explorer Sixth Generation (2020-present)

Error Codes
15-30 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
358 words

Problem Statement

Learn how to reset the transmission fluid change light in your 2020-present Ford Explorer. Step-by-step guide for a quick and easy fix.

Affected Component
Transmission
Estimated Time
15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in 'Park' and the parking brake is engaged before performing the reset.

Symptoms

  • •Transmission fluid change light illuminated on the dashboard
  • •No other performance issues noted prior to the fluid change
  • •No warning messages related to transmission performance

Diagnostic Steps

  1. 1
  2. 2
  3. 3

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Vehicle owner's manual

Parts Required

  • •None for the reset process

Additional Information

Affected Component
Transmission
Estimated Time
15-30 minutes
Difficulty
easy
Severity
low
Tools Required
2 items
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: OBD-II scanner (if needed) and vehicle owner's manual.
  • Ensure the vehicle is parked on a level surface and the engine is off.
2. Resetting the Transmission Fluid Change Light
  1. Turn the ignition switch to the "On" position without starting the engine.
  2. Press the accelerator pedal three times within 10 seconds.
  3. Turn the ignition switch to the "Off" position.
  4. Start the engine and check if the transmission fluid change light is off.
3. Additional Steps (if necessary)
  1. If the light remains on, use an OBD-II scanner:
    • Connect the scanner to the OBD-II port under the dashboard.
    • Navigate to the transmission section and look for any stored codes.
    • Clear any codes if they are related to the fluid change.
  2. Repeat the reset procedure as described above.