FAULTBASE
Error CodesASKCars
© 2025 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Home/Cars/Ford/Explorer/Sixth Generation (2020-present)/how to reset the tire pressure light on Ford Explorer Sixth Generation (2020-present)

how to reset the tire pressure light on Ford Explorer Sixth Generation (2020-present)

Ford Explorer Sixth Generation (2020-present)

Error Codes
Severity: mediumDifficulty: easy30 minutes
3 min read
433 words

Problem Statement

Learn how to reset the tire pressure light on a 2020-present Ford Explorer. Step-by-step guide with diagnostic procedures and safety tips.

Component
Electrical
Repair Time
30 minutes

Safety Warnings

  • ⚠Ensure the vehicle is on a flat surface when checking tire pressure.
  • ⚠Always follow safety procedures when working near the vehicle's tires.

Symptoms

  • •Tire pressure warning light illuminated on the dashboard
  • •Possible fluctuating tire pressure readings on the display
  • •Noticeable under-inflation or over-inflation of tires when checked manually
  • •Reduced fuel efficiency due to improper tire pressure
  • •Vehicle handling issues such as pulling to one side

Diagnostic Steps

  1. 1Check each tire’s pressure with a tire pressure gauge to confirm they are within the recommended range.
  2. 2Inspect tires visually for any visible damage or wear that may affect pressure.
  3. 3Verify that the spare tire (if equipped with a TPMS sensor) is also properly inflated.
  4. 4Examine the vehicle's owner's manual for the recommended tire pressure values.
  5. 5Confirm that the tire pressure monitoring system (TPMS) is functioning correctly by scanning for error codes if necessary.

Solution

Solution

1. Preparation

  • Ensure that all tires are properly inflated to the manufacturer's recommended pressure.
  • Turn the vehicle's ignition to the "On" position without starting the engine.

2. Resetting the Tire Pressure Monitoring System

  • Locate the TPMS reset button, which is typically found under the steering column or near the driver's side door.
  • Press and hold the TPMS reset button until the tire pressure light blinks three times, then release the button.
  • Start the engine and allow it to run for a few minutes.

3. Finalizing the Reset

  • Turn off the engine.
  • Drive the vehicle at speeds above 50 mph for a few minutes to allow the TPMS to recalibrate.
  • Check to see if the tire pressure warning light remains off.

Verification

After completing the repair, verify that the issue has been resolved:

  • Test the affected component to ensure it functions correctly
  • Check for any error codes or warning lights
  • Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • Tire pressure gauge
  • TPMS reset tool (if applicable)

Parts Required

  • None specifically required for the reset, but consider replacement TPMS sensors if faulty.

Additional Information

Component

Electrical

Repair Time

30 minutes

Difficulty

easy

Severity

medium

Tools

2 items

Parts

1 items

Related Faults

  1. How can I fix issues with the Ford Explorer 2020's heated seats?

    Learn how to diagnose and repair heated seat issues in your 2020 Ford Explorer with detailed steps and required tools.

    heated seats4 symptoms

  2. What are the common causes of the Ford Explorer 2020's battery draining quickly?

    Explore the common causes of rapid battery drain in the 2020 Ford Explorer, including symptoms, diagnostic steps, and repair instructions.

    battery, electrical system, alternator5 symptoms

  3. What are the most frequent error codes associated with the Ford Explorer 2020?

    Discover the most frequent error codes associated with the 2020 Ford Explorer, including symptoms, diagnostic steps, and repair instructions.

    Engine, Exhaust, EVAP System8 symptoms

  4. Why is my 2020 Ford Explorer's transmission slipping?

    Learn how to diagnose and repair transmission slipping issues in your 2020 Ford Explorer with our comprehensive guide.

    P0700Transmission5 symptoms

  5. Why does my 2020 Ford Explorer have a transmission fluid leak?

    Learn how to diagnose and repair transmission fluid leaks in your 2020 Ford Explorer with step-by-step instructions and required tools.

    transmission4 symptoms

  6. What are the signs of a failing differential in the Ford Explorer Sixth Generation?

    Learn about the symptoms, diagnostic steps, and tools required to identify and address differential issues in the Ford Explorer Sixth Generation (2020-present).

    differential7 symptoms

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation