how to reset the oil light on Ford Explorer Sixth Generation (2020-present)

Ford Explorer Sixth Generation (2020-present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

347 words

Problem Statement

Learn how to reset the oil light on a Ford Explorer Sixth Generation (2020-present) after an oil change. Step-by-step guide for quick reset.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is securely parked and the engine is off before performing the reset.

Symptoms

•Oil light remains illuminated on the dashboard
•Recent oil change performed
•Maintenance reminder displayed on the screen

Diagnostic Steps

1
Ensure the vehicle is in park and the engine is off.
2
Turn the ignition key to the 'On' position without starting the engine.
3
Press the gas pedal three times within 10 seconds.
4
Check the dashboard for the oil light to see if it resets.
5
Start the engine to confirm the oil light is no longer illuminated.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in park and the engine is off.
2
Turn the ignition key to the 'On' position without starting the engine.
3
Press the gas pedal three times within 10 seconds.
4
Check the dashboard for the oil light to see if it resets.
5
Start the engine to confirm the oil light is no longer illuminated.

Solution

1. Preparation

Gather necessary tools: None required for this procedure.
Ensure the vehicle is parked on a level surface and the engine is off.

2. Access the Ignition

Insert the key into the ignition or ensure the key fob is present if equipped with push-button start.

3. Turn on the Ignition

Turn the ignition switch to the "On" position (do not start the engine). For push-button start, press the start button without pressing the brake pedal.

4. Reset the Oil Light

Quickly press the gas pedal three times within a span of 10 seconds.
Watch the dashboard indicators; the oil light should either turn off or blink to indicate the reset is successful.

5. Verify the Reset

Start the engine and check that the oil light is no longer illuminated.