how to reset the oil change light on my Ford Explorer Sixth Generation (2020-present)

Ford Explorer Sixth Generation (2020-present)

Error Codes

5 minutes

Time

easy

Difficulty

low

Severity

2 min read

327 words

Problem Statement

Learn how to reset the oil change light on your Ford Explorer Sixth Generation (2020-present) with this quick and easy guide.

Affected Component

Electrical

Estimated Time

5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park and on a flat surface to prevent accidental movement while performing the reset.

Symptoms

•Oil change light remains illuminated on the dashboard
•Warning message displayed on the instrument cluster
•No engine performance issues related to oil quality

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the engine is turned off.
2
Turn the ignition to the 'ON' position without starting the engine.
3
Press the gas pedal three times within 10 seconds.
4
Check the dashboard for the oil change light to ensure it has turned off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools: None required for this procedure.
Ensure the vehicle is parked securely.

2. Access the Ignition

Sit in the driver's seat and close all doors.
Insert the key into the ignition or press the start button (if equipped).

3. Turn Ignition On

Turn the ignition to the "ON" position. This means the dashboard lights should illuminate without the engine starting.

4. Reset the Oil Change Light

With the ignition in the "ON" position, quickly press the gas pedal down three times within a span of 10 seconds.
Observe the dashboard to confirm if the oil change light has turned off.