how to reset the oil change light on Ford Explorer Sixth Generation (2020-present)

Ford Explorer Sixth Generation (2020-present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

3 min read

401 words

Problem Statement

Learn how to reset the oil change light on Ford Explorer (2020-present) with this step-by-step guide. Ensure your maintenance reminders are accurate.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' or 'Neutral' and on a flat surface before starting the reset process.

Symptoms

•Oil change light is illuminated on the dashboard
•Maintenance reminder is displayed on the instrument panel
•Engine oil has been changed but light remains on

Diagnostic Steps

1
Turn the ignition key to the 'On' position without starting the engine.
2
Navigate to the 'Settings' menu on the instrument cluster display using the steering wheel controls.
3
Select 'Vehicle' and then scroll to 'Oil Life Reset.'
4
Confirm the reset action by selecting 'Reset' when prompted.
5
Turn the ignition off and then start the engine to verify the light has been reset.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required specifically for the reset process.

Parts Required

•None required specifically for the reset process.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Turn the ignition key to the 'On' position without starting the engine.
2
Navigate to the 'Settings' menu on the instrument cluster display using the steering wheel controls.
3
Select 'Vehicle' and then scroll to 'Oil Life Reset.'
4
Confirm the reset action by selecting 'Reset' when prompted.
5
Turn the ignition off and then start the engine to verify the light has been reset.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Have the vehicle's key fob or ignition key available.

2. Access the Ignition

Insert the key into the ignition or ensure the key fob is within the vehicle.
Turn the ignition to the "On" position without starting the engine.

Using the controls on the steering wheel, locate the "Settings" option on the instrument cluster display.
Press the "OK" button or equivalent to enter the Settings menu.

4. Reset the Oil Life

Scroll to "Vehicle" using the steering wheel controls.
Locate "Oil Life Reset" and select it.
Confirm the reset by selecting "Reset" or "Yes" when prompted.

5. Confirm the Reset

Turn the ignition off completely.
Start the engine to check if the oil change light is no longer illuminated.