how to reset the oil change light on Ford Explorer Sixth Generation (2020-present)

Ford Explorer Sixth Generation (2020-present)

Error Codes

5 minutes

Time

easy

Difficulty

low

Severity

2 min read

341 words

Problem Statement

Learn how to reset the oil change light on a 2020-present Ford Explorer. Step-by-step guide to ensure your maintenance reminders are accurate.

Affected Component

Electrical

Estimated Time

5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' to avoid unintended movement during the process.

Symptoms

•Oil change light illuminated on the dashboard
•Maintenance reminder message displayed on the instrument cluster
•Inconsistent oil change interval notifications

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and is in the 'Park' position.
2
Turn the ignition to the 'On' position without starting the engine.
3
Use the accelerator pedal to press down three times within 10 seconds.
4
Observe the oil change light and check if it turns off after the reset procedure.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required for the reset process.

Parts Required

•None required for the reset process.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and is in the 'Park' position.
2
Turn the ignition to the 'On' position without starting the engine.
3
Use the accelerator pedal to press down three times within 10 seconds.
4
Observe the oil change light and check if it turns off after the reset procedure.

Solution

1. Preparation

Gather necessary tools (if required).
Ensure that the vehicle is in a safe, well-ventilated area.

2. Turn on the Ignition

Insert the key fob into the ignition or press the start button without pressing the brake pedal.
Turn the ignition to the "On" position, ensuring that the dashboard lights illuminate but the engine remains off.

3. Reset the Oil Change Light

Quickly press the accelerator pedal three times within 10 seconds.
Watch for the oil change light on the dashboard. It should turn off, indicating that the reset was successful.

4. Verify Reset

Turn off the ignition completely.
Start the engine and check to ensure the oil change light does not illuminate.