how to reset the maintenance light on Ford Explorer Sixth Generation (2020-present)

Ford Explorer Sixth Generation (2020-present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

381 words

Problem Statement

Learn how to reset the maintenance light on a Ford Explorer (2020-present) with this step-by-step guide. Ensure your vehicle is ready for the road.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park and on a flat surface before performing the reset.

Symptoms

•Maintenance light remains illuminated on the dashboard
•Reminder for scheduled service is displayed
•Vehicle may have completed necessary maintenance tasks

Diagnostic Steps

1
Ensure the vehicle is in park and the ignition is turned off.
2
Turn the ignition key to the 'On' position without starting the engine, or press the start button without pressing the brake pedal.
3
Navigate to the 'Settings' menu on the instrument cluster display using the steering wheel controls.
4
Select the 'Vehicle' option from the settings menu.
5
Locate the 'Oil Life Reset' or 'Maintenance Reset' option within the vehicle settings.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Vehicle key

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in park and the ignition is turned off.
2
Turn the ignition key to the 'On' position without starting the engine, or press the start button without pressing the brake pedal.
3
Navigate to the 'Settings' menu on the instrument cluster display using the steering wheel controls.
4
Select the 'Vehicle' option from the settings menu.
5
Locate the 'Oil Life Reset' or 'Maintenance Reset' option within the vehicle settings.

Solution

1. Preparation

Ensure the vehicle is parked on a flat surface.
Gather the vehicle key and ensure the doors are closed.

2. Accessing the Settings

Turn the ignition to the "On" position (do not start the engine).
Use the steering wheel controls to navigate to the "Settings" menu on the instrument cluster.
Select "Vehicle" from the settings options.

3. Resetting the Maintenance Light

Within the "Vehicle" settings, scroll to find "Oil Life Reset" or "Maintenance Reset."
Select the reset option.
Confirm the reset when prompted by pressing the "OK" button on the steering wheel controls.

4. Finalizing the Reset

Turn the ignition off and then back on to verify that the maintenance light is no longer illuminated.
Check the dashboard for any remaining warning lights to ensure the reset was successful.