how to reset the maintenance light on Ford Explorer Sixth Generation (2020-present)

Ford Explorer Sixth Generation (2020-present)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

381 words

Problem Statement

Learn how to reset the maintenance light on a 2020-present Ford Explorer. Step-by-step guide for a quick and easy reset after maintenance.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a secure position while performing these steps.

Symptoms

•Maintenance light illuminated on the dashboard
•Potentially displayed message indicating service is due
•Service indicator may persist after maintenance has been performed

Diagnostic Steps

1
Ensure the vehicle is turned off and in the 'Off' position.
2
Press the brake pedal and hold it down.
3
Turn the ignition key to the 'On' position without starting the engine.
4
Observe the dashboard for the 'Service' or 'Maintenance' message.
5
Use the steering wheel controls to navigate to the 'Settings' menu on the instrument cluster.
6
Select 'Vehicle,' then scroll to 'Oil Life Reset' or 'Maintenance Light Reset.'

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required

Parts Required

•None required

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is turned off and in the 'Off' position.
2
Press the brake pedal and hold it down.
3
Turn the ignition key to the 'On' position without starting the engine.
4
Observe the dashboard for the 'Service' or 'Maintenance' message.
5
Use the steering wheel controls to navigate to the 'Settings' menu on the instrument cluster.
6
Select 'Vehicle,' then scroll to 'Oil Life Reset' or 'Maintenance Light Reset.'

Solution

1. Preparation

Gather necessary tools: None required for this procedure.
Ensure the vehicle is parked safely and the engine is off.

With the vehicle in the "Off" position, press and hold the brake pedal.
Turn the ignition key to the "On" position (do not start the engine).

3. Resetting the Maintenance Light

While still pressing the brake pedal, observe the dashboard for the maintenance light.
Use the steering wheel controls to scroll through the menu until you reach "Settings."
Select "Vehicle," then navigate to "Oil Life Reset" or "Maintenance Light Reset."
Confirm the reset by selecting "Yes" when prompted.

4. Final Steps

Turn the ignition back to the "Off" position.
Release the brake pedal and then start the vehicle to confirm the maintenance light is no longer illuminated.