how to reset the ABS light on my Ford Explorer Sixth Generation (2020-present)

Ford Explorer Sixth Generation (2020-present)

Error Codes

1-2 hours

Time

medium

Difficulty

high

Severity

3 min read

408 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to reset the ABS light on your Ford Explorer Sixth Generation (2020-present). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Brakes

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before performing any electrical work on the vehicle.
•Ensure that the vehicle is securely parked and unable to roll while performing repairs.

Symptoms

•ABS warning light illuminated on the dashboard
•Reduced braking performance during hard stops
•Increased stopping distance
•Brake pedal feels spongy or hard
•Possible traction control warning light also illuminated

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any underlying issues.
2
Inspect the ABS sensors for dirt or damage.
3
Check the ABS fuse for continuity.
4
Verify brake fluid levels and condition.
5
Inspect wiring and connectors related to the ABS module for damage or corrosion.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Multimeter

Parts Required

•Replacement ABS sensors (if applicable)
•Fuse (if blown)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a level surface with the engine off.
Disconnect the battery to prevent electrical shorts or shocks.

Tools Required:

OBD-II scanner
Socket set
Multimeter

2. Clear ABS Codes

Reconnect the battery after ensuring all connectors are secure.
Use the OBD-II scanner to connect to the vehicle's diagnostic port.
Navigate to the ABS section and select "Clear Codes" or "Reset ABS Light."
Confirm the action and wait for the scanner to complete the process.

3. Inspect and Address Underlying Issues

If error codes were present, address the specific issues identified (e.g., replace faulty sensors, repair wiring).
Re-scan the ABS system to ensure no error codes remain.

4. Test Drive

Take the vehicle for a test drive to ensure that the ABS light does not re-illuminate.
Perform several hard braking tests in a safe area to confirm the system is functioning correctly.