how to reset Ford Explorer Sixth Generation (2020-present) tire pressure warning light

Ford Explorer Sixth Generation (2020-present)

Error Codes

30 minutes

Time

medium

Difficulty

medium

Severity

3 min read

493 words

Problem Statement

Learn how to reset the tire pressure warning light on a 2020-present Ford Explorer. Step-by-step guide with diagnostic steps and safety tips.

Affected Component

Tires

Estimated Time

30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is on a stable surface when checking tire pressure.
•Avoid working on tires when they are hot, as pressure can read higher than normal.

Symptoms

•Tire pressure warning light illuminated on the dashboard
•Possible fluctuation in tire pressure readings
•Warning message on the vehicle's display screen
•Tire pressure may be below the recommended level

Diagnostic Steps

1
Check the current tire pressures using a tire pressure gauge.
2
Inflate any under-inflated tires to the manufacturer-recommended pressure.
3
Verify that the pressure in all tires, including the spare (if applicable), is at the correct level.
4
Inspect the tires for any visible damage or leaks that could affect tire pressure.
5
Ensure the vehicle is at a complete stop and in the 'On' position without starting the engine.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•Air compressor

Parts Required

•None required for the reset, but consider tire sealant or repair kits for punctured tires.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the current tire pressures using a tire pressure gauge.
2
Inflate any under-inflated tires to the manufacturer-recommended pressure.
3
Verify that the pressure in all tires, including the spare (if applicable), is at the correct level.
4
Inspect the tires for any visible damage or leaks that could affect tire pressure.
5
Ensure the vehicle is at a complete stop and in the 'On' position without starting the engine.

Solution

1. Preparation

Gather necessary tools: tire pressure gauge, air compressor (if needed).
Ensure the vehicle is parked on a level surface with the engine off.

2. Inflate Tires

Use the tire pressure gauge to check each tire's pressure.
Inflate any under-inflated tire to the manufacturer's recommended psi, typically found on the driver’s side door jamb.
Repeat for all tires, including the spare if applicable.

3. Reset Tire Pressure Monitoring System (TPMS)

Turn on the vehicle's ignition without starting the engine by pressing the start button twice or turning the key to the "On" position.
Locate the TPMS reset button, typically found beneath the steering column or in the glove box.
Press and hold the TPMS reset button until the TPMS warning light blinks three times, then release it.
Wait for about 20 minutes for the system to reset. The light should turn off once the system recognizes the tire pressures are correct.

4. Final Check

After the reset, check the dashboard to ensure the tire pressure warning light has turned off.
Test drive the vehicle for a short distance to confirm the TPMS is functioning properly.