how to fix the parking assist not working on Ford Explorer Sixth Generation (2020-present)

Ford Explorer Sixth Generation (2020-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

503 words

Problem Statement

Learn how to diagnose and fix parking assist issues in Ford Explorer (2020-present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Electrical

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems to prevent shocks or shorts.
•Allow the vehicle to cool down before inspecting components near the engine.

Symptoms

•Parking assist system disabled message displayed on the dashboard
•No audible alerts when approaching obstacles
•Visual indicators on the display not activating
•Inconsistent detection of nearby objects
•Check parking sensors for dirt or obstruction

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any faults in the parking assist system.
2
Inspect the parking sensors for physical damage, dirt, or obstructions.
3
Check the vehicle's battery voltage to ensure it is within normal operating range.
4
Test the wiring and connectors of the parking assist system for continuity and corrosion.
5
Verify the calibration of the parking assist system using a diagnostic tool if available.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Socket set
•Screwdrivers
•Soft cloth

Parts Required

•Replacement parking sensors (if any are damaged)
•Wiring connectors (if any need replacement)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any faults in the parking assist system.
2
Inspect the parking sensors for physical damage, dirt, or obstructions.
3
Check the vehicle's battery voltage to ensure it is within normal operating range.
4
Test the wiring and connectors of the parking assist system for continuity and corrosion.
5
Verify the calibration of the parking assist system using a diagnostic tool if available.

Solution

1. Preparation

Gather tools and parts needed for repair.
Disconnect the negative battery terminal to prevent electrical shorts.
Safety goggles and gloves should be worn.

2. Clean Parking Sensors

Remove any dirt or debris from the parking sensors using a soft cloth and mild soap solution.
Rinse with clean water and dry thoroughly.
Inspect for cracks or damage; replace any damaged sensors.

3. Check and Repair Wiring

Inspect the wiring harness connected to the parking sensors for any signs of wear, corrosion, or damage.
Use a multimeter to check for continuity in the wiring. Repair or replace any damaged sections of wire.
Ensure all connectors are securely fastened and free of corrosion.

4. Recalibrate Parking Assist System

Reconnect the negative battery terminal.
Use a specialized diagnostic tool to recalibrate the parking assist system according to the manufacturer's specifications.
Follow on-screen instructions to complete the calibration process.

5. Final Inspection

Perform a visual inspection of all components to ensure everything is securely connected and in good condition.
Test the parking assist system by engaging it in a safe environment to verify function.