How do I troubleshoot the remote start not working issue in a 2022 Ford Explorer?

Ford Explorer Sixth Generation (2020-present)

Error Codes

medium

Difficulty

medium

Severity

4 min read

684 words

Problem Statement

Learn how to troubleshoot and fix the remote start not working issue in a 2022 Ford Explorer with detailed diagnostic steps and repair instructions.

Affected Component

remote start system

Symptoms

•Remote start system fails to activate when the remote is pressed.
•The vehicle does not respond with lights flashing or engine starting.
•Dashboard displays no notifications or error messages related to remote start.

Diagnostic Steps

1
Check Battery and Remote Functionality
2
Verify Vehicle Settings
3
Check for Security System Issues
4
Inspect for Key Fob Recognition
5
Test Range and Interference
6
Inspect the Remote Start Module
7
Check Engine Conditions

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Multimeter or battery tester
•replacement battery (typically CR2032)
•Vehicle owner’s manual
•OBD-II scanner (optional for error codes)
•basic hand tools (screwdriver set, socket set)
•wiring diagrams for reference

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

Troubleshooting Remote Start Not Working in a 2022 Ford Explorer

Repair Instructions

Replace Key Fob Battery
- Open the key fob using a small screwdriver or a flat tool.
- Replace the old battery with a new one, ensuring it is inserted in the correct orientation.
- Reassemble the key fob and test the remote start function.
Adjust Settings
- If the remote start was disabled, navigate through the vehicle settings and enable it.
- Confirm changes and exit settings.
Reset the Security System
- If the security system is preventing remote start, you may need to reset it.
- Consult the owner’s manual for the reset procedure, or disconnect the vehicle battery for a few minutes to reset systems.
Repair or Replace Remote Start Module
- If the module is confirmed faulty, obtain a replacement part.
- Disconnect the battery, remove the faulty module, and install the new module.
- Reconnect the battery and test the remote start.
Resolve Engine Issues
- If engine conditions are preventing remote start, repair any faults indicated by the OBD-II scanner.
- Clear any trouble codes and test the remote start function again.

Conclusion

If after following these diagnostic steps and repairs the remote start feature still does not work, it may be necessary to consult a professional technician or a Ford dealership for further diagnosis. Always ensure you are adhering to safety protocols while working on the vehicle.