FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How can I fix the windshield wipers not working on my 2020 Ford Explorer? - Ford Explorer
Home/Cars/Ford/Explorer/Sixth Generation (2020-present)/How can I fix the windshield wipers not working on my 2020 Ford Explorer?

How can I fix the windshield wipers not working on my 2020 Ford Explorer?

Ford Explorer Sixth Generation (2020-present)

Error Codes
2-3 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
662 words

Problem Statement

Learn how to diagnose and fix windshield wipers that are not working on your 2020 Ford Explorer with step-by-step instructions and required tools.

Affected Component
windshield wipers
Estimated Time
2-3 hours

Symptoms

  • •Windshield wipers do not operate at all.
  • •Wipers only work intermittently.
  • •Wipers get stuck in one position (either up or down).
  • •Wipers operate but make a grinding noise.

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Flathead screwdriver
  • •Phillips screwdriver
  • •Multimeter (for electrical testing)
  • •Fuse puller (if needed)
  • •12V power source (for testing the motor directly)
  • •Safety gloves
  • •Diagnostic scan tool (optional)

Additional Information

Affected Component
windshield wipers
Estimated Time
2-3 hours
Difficulty
medium
Severity
medium
Tools Required
7 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation

Fixing Windshield Wipers Not Working on a 2020 Ford Explorer

Tools Required
  • Flathead screwdriver
  • Phillips screwdriver
  • Multimeter (for electrical testing)
  • Fuse puller (if needed)
  • 12V power source (for testing the motor directly)
  • Safety gloves
  • Diagnostic scan tool (optional)
Repair Instructions
Step 1: Check the Wiper Switch
  • Turn on the ignition and operate the wiper switch.
  • If there is no response, proceed to check the fuse.
Step 2: Inspect and Replace Fuses
  • Open the fuse box and locate the windshield wiper fuse.
  • Remove the fuse using a fuse puller or pliers.
  • Inspect the fuse visually; if the metal strip is broken, replace it with a new fuse of the same rating.
Step 3: Test the Wiper Motor
  • If the fuse is intact, access the wiper motor by removing the plastic cover on the wiper assembly.
  • Disconnect the motor connector and use a multimeter to check for voltage at the connector while operating the wiper switch.
  • If there is no voltage, the issue lies in the switch or wiring.
Step 4: Apply Direct Power to Wiper Motor
  • If the motor is suspected to be faulty, disconnect the motor from the vehicle.
  • Using a 12V power source, connect the motor directly to power.
  • If the motor operates, replace the wiper motor; if not, it is defective and needs to be replaced.
Step 5: Inspect the Linkage
  • If the motor is functional, check the wiper linkage by removing the wiper arms.
  • Ensure that the linkage is not bent or disconnected.
  • If damaged, replace the wiper linkage assembly.
Step 6: Reassemble and Test
  • Once all repairs are made, reattach the wiper arms and any covers removed.
  • Turn on the ignition and test the wipers in all settings.
  • Ensure they operate smoothly without any grinding or sticking.
Step 7: Final Inspection
  • Double-check that all wiring connections are secure.
  • Inspect the wiper blades and arms for proper alignment and function.
Conclusion

If the windshield wipers still do not function after performing these steps, it may be advisable to consult with a professional technician or visit a Ford dealership for further diagnosis and repair.