my Ford Explorer makes a grinding noise when I turn what's wrong

Solution

1. Preparation

• Gather necessary tools and parts.
• Park the vehicle on a flat surface and ensure the engine is off.
• Disconnect the battery for safety.

2. Inspect and Replace Power Steering Fluid

• Remove the power steering fluid reservoir cap.
• Check fluid level; add fluid if low, using the manufacturer-recommended type.
• If fluid is contaminated, drain the old fluid using a turkey baster or siphon.
• Refill with new power steering fluid and replace the cap.

3. Inspect and Replace Steering Components

• Raise the front of the vehicle using a jack and secure it with jack stands.
• Inspect the steering linkage for worn or damaged components, such as tie rods and the steering rack.
• Replace any damaged steering components as needed, using a socket set and torque wrench to secure new parts to the manufacturer's specifications.

4. Inspect and Replace Suspension Components

• Check the front suspension for any damaged components, such as control arms or ball joints.
• Use a ball joint separator to remove any worn ball joints.
• Install new ball joints and control arms, ensuring proper alignment and torque specifications.

5. Reassemble and Lower Vehicle

• Reinstall any removed components and ensure all fasteners are tightened to specification.
• Lower the vehicle back to the ground and reconnect the battery.