my Ford Explorer Fifth Generation (2011-2019) is shaking while parked what could be wrong

Ford Explorer Fifth Generation (2011-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

452 words

Problem Statement

Learn how to diagnose and fix engine shaking while parked in Ford Explorer 2011-2019. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Engine

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect battery before working on electrical systems.
•Allow engine to cool before inspecting components.

Symptoms

•Engine vibration detected while the vehicle is stationary
•Possible rough idle
•Check engine light illuminated
•Unusual noises from the engine compartment
•Increased fuel consumption

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any engine-related issues.
2
Inspect engine mounts for signs of wear or damage.
3
Check for vacuum leaks in hoses connected to the intake manifold.
4
Examine the ignition system components (spark plugs, coils) for wear or failure.
5
Assess fuel system performance, including fuel pressure and injector function.
6
Evaluate the condition of the air filter and intake system.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Pry bar
•Spark plug socket
•Multimeter
•Fuel pressure gauge

Parts Required

•Engine mounts (if damaged)
•Spark plugs (if worn)
•Ignition coils (if faulty)
•Vacuum hoses (if cracked)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any engine-related issues.
2
Inspect engine mounts for signs of wear or damage.
3
Check for vacuum leaks in hoses connected to the intake manifold.
4
Examine the ignition system components (spark plugs, coils) for wear or failure.
5
Assess fuel system performance, including fuel pressure and injector function.
6
Evaluate the condition of the air filter and intake system.

Solution

1. Preparation

Gather required tools and parts.
Ensure the vehicle is parked on a level surface and the engine is cool.
Disconnect the battery to prevent electrical shorts.

2. Inspect Engine Mounts

Remove any necessary covers to access engine mounts.
Visually inspect engine mounts for cracks or separation.
Use a pry bar to test for movement in the mounts; replace if excessive play is detected.
Tools Required: Socket set, pry bar

3. Check Ignition System

Remove spark plugs using a spark plug socket.
Inspect plugs for wear or fouling; replace if necessary.
Test ignition coils with a multimeter for proper resistance.
Reinstall or replace components as needed.
Tools Required: Spark plug socket, multimeter

4. Check for Vacuum Leaks

Start the engine and use a smoke machine or carburetor cleaner to detect leaks around hoses.
Replace any damaged hoses or seals as needed.

5. Inspect Fuel System

Use a fuel pressure gauge to check fuel pressure at the rail.
Listen for injector operation; replace any faulty injectors.
Tools Required: Fuel pressure gauge