my Ford Explorer Fifth Generation (2011-2019) has excessive tire wear how to fix it

Ford Explorer Fifth Generation (2011-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

469 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix excessive tire wear on your 2011-2019 Ford Explorer. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always use jack stands when working under the vehicle.
•Wear safety glasses to protect your eyes from debris.

Symptoms

•Uneven tire tread wear (more wear on one side)
•Vehicle pulling to one side while driving
•Vibration or noise while driving
•Tires wearing out faster than expected
•Increased steering effort or instability

Diagnostic Steps

1
Inspect tire pressure on all tires and adjust to the manufacturer’s recommended levels.
2
Examine the tire tread for signs of uneven wear patterns.
3
Perform a visual inspection of the suspension components for wear or damage (e.g., shocks, struts, bushings).
4
Check the alignment settings using a wheel alignment machine.
5
Test the vehicle's steering and suspension for any unusual play or noise during operation.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•jack
•jack stands
•tire pressure gauge
•torque wrench
•alignment tools

Parts Required

•Replacement tires (if necessary)
•Suspension components (if worn)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect tire pressure on all tires and adjust to the manufacturer’s recommended levels.
2
Examine the tire tread for signs of uneven wear patterns.
3
Perform a visual inspection of the suspension components for wear or damage (e.g., shocks, struts, bushings).
4
Check the alignment settings using a wheel alignment machine.
5
Test the vehicle's steering and suspension for any unusual play or noise during operation.

Solution

1. Preparation

Gather tools: jack, jack stands, tire pressure gauge, torque wrench, alignment tools.
Ensure the vehicle is on a flat surface and secure it with wheel chocks.

2. Tire Pressure Adjustment

Use a tire pressure gauge to check the pressure in all tires.
Inflate or deflate tires to match the manufacturer’s specifications found in the owner’s manual or on the driver’s door jamb.

3. Replace or Rotate Tires (if needed)

If any tires show significant wear, replace them with new ones.
If the wear is uneven but still within acceptable limits, consider rotating the tires according to the manufacturer’s recommendations.

4. Suspension Inspection and Repair

Inspect Components: Check shocks, struts, control arms, and bushings for wear or damage.
Replace Worn Components: If any parts are found to be worn, replace them with OEM or high-quality aftermarket parts.

5. Wheel Alignment

Adjust Alignment: Using a wheel alignment machine, set the front and rear toe, camber, and caster angles to the manufacturer's specifications.
Torque Specifications: Ensure that all suspension and alignment bolts are torqued to the manufacturer's specifications.