my Ford Explorer Fifth Generation (2011-2019) feels like it’s losing power while driving, what could...

Ford Explorer Fifth Generation (2011-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

498 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix power loss issues in Ford Explorer (2011-2019). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Engine

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical components.
•Allow the engine to cool before performing any work on the intake system.

Symptoms

•Check engine light illuminated
•Engine stalling or hesitation during acceleration
•Rough idling when at a stop
•Poor fuel economy
•Increased engine noise or unusual sounds
•Sluggish response when pressing the accelerator

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any stored trouble codes.
2
Check fuel levels and ensure the fuel pump is operational.
3
Inspect the air filter for clogs or restrictions that could affect airflow.
4
Examine the throttle body for carbon buildup and functionality.
5
Test the ignition system components (spark plugs, wires, coils) for signs of wear or failure.
6
Check for vacuum leaks in hoses and gaskets that could impact engine performance.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Throttle body cleaner
•Spark plug socket

Parts Required

•New air filter
•New spark plugs
•Replacement vacuum hoses (if necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any stored trouble codes.
2
Check fuel levels and ensure the fuel pump is operational.
3
Inspect the air filter for clogs or restrictions that could affect airflow.
4
Examine the throttle body for carbon buildup and functionality.
5
Test the ignition system components (spark plugs, wires, coils) for signs of wear or failure.
6
Check for vacuum leaks in hoses and gaskets that could impact engine performance.

Solution

1. Preparation

Gather necessary tools and parts.
Disconnect the battery to ensure safety during repairs.

2. Inspect and Clean the Throttle Body

Remove the throttle body from the intake manifold using a socket set.
Use throttle body cleaner and a soft cloth to clean the inside, removing carbon deposits.
Reinstall the throttle body and torque the bolts to manufacturer's specifications.

3. Replace Air Filter

Locate the air filter housing and unclip or unscrew it.
Remove the old air filter and inspect for dirt and damage.
Install a new air filter, ensuring it fits snugly in the housing.
Reattach the housing cover securely.

4. Check and Replace Spark Plugs (if necessary)

Remove the ignition coils using a socket set.
Extract the spark plugs using a spark plug socket and inspect them for wear.
Replace old spark plugs with new ones, ensuring correct gap specifications.
Reinstall the ignition coils and torque to the recommended settings.

5. Repair Vacuum Leaks

Visually inspect all vacuum hoses for cracks or disconnections.
Replace any damaged hoses with new ones.
Check intake manifold gaskets and replace if they appear worn or damaged.