how to reset the transmission fluid change light in Ford Explorer Fifth Generation (2011-2019)

Ford Explorer Fifth Generation (2011-2019)

Error Codes

10-15 minutes

Time

easy

Difficulty

medium

Severity

3 min read

413 words

Problem Statement

Learn how to reset the transmission fluid change light in a Ford Explorer (2011-2019). Step-by-step guide with diagnostic steps and safety tips.

Affected Component

Transmission

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is securely parked and the engine is off before performing the reset.

Symptoms

•Transmission fluid change light is illuminated on the dashboard
•No other warning lights present
•Vehicle performs normally but alerts for fluid change
•Possible confusion regarding maintenance status

Diagnostic Steps

1
Confirm that the transmission fluid has been changed and that the correct fluid type has been used.
2
Ensure that the vehicle is in park (P) before attempting to reset the light.
3
Turn the ignition to the 'On' position without starting the engine.
4
Use the vehicle's menu system to navigate to the 'Settings' or 'Vehicle' section.
5
Locate the 'Transmission' or 'Maintenance' option in the menu.
6
Select the option to reset the transmission fluid change light.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Ensure the vehicle is parked on a level surface and the engine is off.
•Confirm that the transmission fluid has been replaced as per manufacturer specifications.

Parts Required

•None required for the reset process

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Confirm that the transmission fluid has been changed and that the correct fluid type has been used.
2
Ensure that the vehicle is in park (P) before attempting to reset the light.
3
Turn the ignition to the 'On' position without starting the engine.
4
Use the vehicle's menu system to navigate to the 'Settings' or 'Vehicle' section.
5
Locate the 'Transmission' or 'Maintenance' option in the menu.
6
Select the option to reset the transmission fluid change light.

Solution

1. Preparation

Tools Required: None specific for the reset process.
Ensure the vehicle is parked on a level surface and the engine is off.
Confirm that the transmission fluid has been replaced as per manufacturer specifications.

2. Ignition On

Insert the key into the ignition and turn it to the "On" position without starting the engine.
Wait for the dashboard lights to illuminate.

Use the steering wheel buttons to navigate through the dashboard menu.
Look for the "Settings" or "Vehicle" option on the display.

4. Reset the Transmission Light

Scroll to the "Transmission" or "Maintenance" section.
Select the option for resetting the transmission fluid change light.
Confirm the reset when prompted.

5. Turn Off Ignition

Turn the ignition off completely.
Wait a few moments before turning it back to the "On" position.