how to reset the tire pressure light on my Ford Explorer Fifth Generation (2011-2019)

Ford Explorer Fifth Generation (2011-2019)

15-30 minutes

Time

easy

Difficulty

medium

Severity

3 min read

438 words

Problem Statement

Learn how to reset the tire pressure light on your Ford Explorer (2011-2019). Step-by-step guide with diagnostic steps and tools required.

Affected Component

Electrical

Estimated Time

15-30 minutes

Important safety information - read before proceeding

1
Check the tire pressures using a tire pressure gauge to ensure they are at the recommended levels.
2
Ensure that all tires, including the spare tire (if applicable), are inflated to the manufacturer's specifications.
3
Inspect the TPMS sensors for any visible damage or malfunction.

After completing the repair, verify that the issue has been resolved:

To prevent this issue from occurring again:

•None required for the reset; however, consider replacement TPMS sensors if issues persist.

No comments yet

Be the first to share your thoughts

Solution

1. Preparation

Tools Required: Tire pressure gauge, vehicle owner's manual
Ensure all tires are inflated to the correct pressure as specified on the driver's side door jamb label.

2. Reset TPMS Light

Turn on the Ignition:
- Insert the key into the ignition and turn it to the "On" position without starting the engine.
Locate the TPMS Reset Button:
- Depending on the model, it may be located under the steering column or near the driver's side dashboard. Consult the owner's manual for the exact location.
Press and Hold the Reset Button:
- Press and hold the TPMS reset button until the TPMS light blinks three times, then release the button.
Turn Off the Ignition:
- Turn the ignition back to the "Off" position.
Start the Engine:
- Start the engine and allow it to run for a few minutes. The TPMS light should turn off, indicating a successful reset.

3. Check for Error Codes (Optional)

If the light remains on, use an OBD-II scanner to check for any error codes related to the TPMS.