how to reset the service light on my Ford Explorer Fifth Generation (2011-2019)

Ford Explorer Fifth Generation (2011-2019)

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

328 words

Problem Statement

Learn how to reset the service light on your Ford Explorer (2011-2019). Step-by-step guide with diagnostic steps and safety warnings included.

Affected Component

Electrical

Estimated Time

10-15 minutes

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' or 'Neutral' with the parking brake engaged before starting the reset process.

1
Ensure that the vehicle is in the 'Off' position and the keys are removed from the ignition.
2
Insert the key into the ignition and turn it to the 'On' position without starting the engine.
3
Press the gas pedal three times within 10 seconds.
4
Turn the ignition off and then back on to check if the service light has been reset.
5
If the light remains on, repeat the process or check for additional service reminders.

After completing the repair, verify that the issue has been resolved:

To prevent this issue from occurring again:

No comments yet

Be the first to share your thoughts

Diagnostic Steps

1
Ensure that the vehicle is in the 'Off' position and the keys are removed from the ignition.
2
Insert the key into the ignition and turn it to the 'On' position without starting the engine.
3
Press the gas pedal three times within 10 seconds.
4
Turn the ignition off and then back on to check if the service light has been reset.
5
If the light remains on, repeat the process or check for additional service reminders.

Solution

1. Preparation

2. Resetting the Service Light

Insert the key into the ignition and turn it to the "On" position without starting the engine.
Press the gas pedal three times quickly within 10 seconds.
Turn the ignition off completely after the third press.
Turn the ignition back to the "On" position to verify that the service light is off.