how to reset the oil light on Ford Explorer Fifth Generation (2011-2019)

Ford Explorer Fifth Generation (2011-2019)

Error Codes

5 minutes

Time

easy

Difficulty

low

Severity

2 min read

330 words

Problem Statement

Learn how to reset the oil light on a Ford Explorer (2011-2019) after an oil change. Step-by-step instructions for a quick and easy reset.

Affected Component

Engine

Estimated Time

5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park (or neutral) and the parking brake is engaged before performing the reset.

Symptoms

•Oil change indicator light illuminated on the dashboard
•Message displayed on the instrument panel indicating oil change required
•Notification chime when starting the vehicle

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the engine is turned off.
2
Turn the ignition key to the 'On' position without starting the engine.
3
Press the accelerator pedal three times within ten seconds.
4
Turn the ignition off and then start the engine to check if the oil light is reset.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Ignition key
•Push-button start

Parts Required

•None required for the reset process.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools:
- Ignition key or push-button start.
Ensure the vehicle is parked safely.

2. Turn on Ignition

Insert the key into the ignition and turn it to the "On" position (do not start the engine).

3. Reset the Oil Light

Press the accelerator pedal three times within ten seconds.
Ensure you complete the presses in quick succession.

4. Verify Reset

Turn the ignition off completely.
Start the engine to confirm that the oil light is no longer illuminated.