how to reset the oil change light on my Ford Explorer Fifth Generation (2011-2019)

Ford Explorer Fifth Generation (2011-2019)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

294 words

Problem Statement

Learn how to reset the oil change light on your Ford Explorer Fifth Generation (2011-2019) with this quick and easy guide. Step-by-step instructions included.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' with the parking brake engaged during the process.

Symptoms

•Oil change light illuminated on the dashboard
•Maintenance reminder displayed in the vehicle's information system
•Vehicle maintenance history not updated

Diagnostic Steps

1
Turn the ignition key to the 'On' position without starting the engine.
2
Press the accelerator pedal three times within five seconds.
3
Turn the ignition off, then turn it back to the 'On' position to verify the reset.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools: None required for this process.
Ensure the vehicle is in a safe location with the engine off.

2. Reset the Oil Change Light

Insert the key into the ignition and turn it to the "On" position (do not start the engine).
Press the accelerator pedal three times quickly within five seconds.
Turn the ignition off completely.
Turn the ignition back to the "On" position (again, do not start the engine).
Check the oil change light to confirm it has reset. The light should no longer be illuminated.