how to reset the oil change light on my Ford Explorer Fifth Generation (2011-2019)

Ford Explorer Fifth Generation (2011-2019)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

361 words

Problem Statement

Learn how to reset the oil change light on your Ford Explorer (2011-2019) with this simple step-by-step guide. Ensure your maintenance reminders are accurate.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' or 'Neutral' before performing this reset procedure.

Symptoms

•Oil change light remains illuminated on the dashboard
•Maintenance reminder notification displayed on the instrument cluster
•No other engine or maintenance lights are active

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the ignition is turned off.
2
Insert the key into the ignition without starting the engine.
3
Press the accelerator pedal three times within 10 seconds.
4
Turn the ignition to the 'On' position without starting the engine.
5
Observe the dashboard for the oil change light to turn off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Ignition key
•Key fob

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the ignition is turned off.
2
Insert the key into the ignition without starting the engine.
3
Press the accelerator pedal three times within 10 seconds.
4
Turn the ignition to the 'On' position without starting the engine.
5
Observe the dashboard for the oil change light to turn off.

Solution

1. Preparation

Gather necessary tools (if required, such as a key fob).
Ensure the vehicle is in a safe location with the engine turned off.

2. Key Insertion and Ignition Position

Insert the key into the ignition or press the start button (if equipped with a keyless entry).
Do not start the engine; just turn the ignition to the "On" position.

3. Accelerator Pedal Action

Firmly press the accelerator pedal three times within 10 seconds.
Ensure each press is complete and deliberate for the system to register the action.

4. Confirm Reset

Turn the ignition off and then back to the "On" position.
Check the dashboard to confirm that the oil change light has turned off.