how to reset the oil change light on Ford Explorer Fifth Generation (2011-2019)

Ford Explorer Fifth Generation (2011-2019)

Error Codes

5 minutes

Time

easy

Difficulty

low

Severity

2 min read

341 words

Problem Statement

Learn how to reset the oil change light on Ford Explorer (2011-2019) with this quick guide. Step-by-step instructions for accurate maintenance reminders.

Affected Component

Electrical

Estimated Time

5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure vehicle is in 'Park' or neutral and on a flat surface before performing the reset.

Symptoms

•Oil change light remains illuminated after oil change
•Maintenance reminder notification appears on the dashboard
•Incorrect oil change interval displayed

Diagnostic Steps

1
Turn the ignition key to the 'On' position without starting the engine.
2
Press the accelerator pedal three times within 10 seconds.
3
Check if the oil change light resets and goes off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required for the reset.

Parts Required

•None required for the reset.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools: none required for the reset.
Ensure the vehicle is parked on a flat surface.
Keep the ignition key within reach.

2. Turn Ignition On

Insert the key and turn it to the "On" position (do not start the engine).
Ensure all dashboard lights illuminate, including the oil change light.

3. Reset Oil Change Light

Quickly press the accelerator pedal three times within 10 seconds.
Observe the oil change light; it should flash and turn off, indicating successful reset.

4. Turn Ignition Off

Turn the ignition key back to the "Off" position.
Remove the key if necessary.

5. Verify Reset

Restart the engine to ensure the oil change light is off.
Check the dashboard for any maintenance notifications.