how to reset the oil change light on Ford Explorer Fifth Generation (2011-2019)

Ford Explorer Fifth Generation (2011-2019)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

3 min read

403 words

Problem Statement

Learn how to reset the oil change light on Ford Explorer (2011-2019) after an oil change. Step-by-step guide for proper maintenance tracking.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is stationary and in a safe location while performing these steps.

Symptoms

•Oil change light illuminated on the dashboard
•Warning message displayed regarding oil change
•Engine oil change has been performed

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the ignition is in the OFF position.
2
Turn the ignition key to the ON position without starting the engine.
3
Access the instrument cluster display using the control on the steering wheel.
4
Navigate to the 'Settings' menu using the steering wheel controls.
5
Select 'Vehicle' then look for 'Oil Life Reset' option.
6
Confirm the reset action when prompted.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required

Parts Required

•None required

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the ignition is in the OFF position.
2
Turn the ignition key to the ON position without starting the engine.
3
Access the instrument cluster display using the control on the steering wheel.
4
Navigate to the 'Settings' menu using the steering wheel controls.
5
Select 'Vehicle' then look for 'Oil Life Reset' option.
6
Confirm the reset action when prompted.

Solution

1. Preparation

Gather necessary tools: None required for this process.
Ensure the vehicle is in the ON position without starting the engine.

Turn the ignition to the ON position (do not start the engine).
Press the right arrow button on the steering wheel to access the main menu of the instrument cluster.
Scroll down to the "Settings" option and select it.

3. Reset Oil Life

In the "Settings" menu, select "Vehicle."
Scroll to find "Oil Life Reset."
Press and hold the "OK" button until the oil change light resets (approximately 2 seconds).
A confirmation message should appear, indicating the oil life has been reset to 100%.

4. Verify Reset

Turn the ignition off and then back to the ON position.
Check the instrument cluster to ensure the oil change light is no longer illuminated.