how to reset the oil change light in my Ford Explorer Fifth Generation (2011-2019)

Ford Explorer Fifth Generation (2011-2019)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

318 words

Problem Statement

Learn how to reset the oil change light in your Ford Explorer (2011-2019) with this step-by-step guide. Ensure accurate maintenance reminders.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' or 'Neutral' with the parking brake engaged before attempting the reset.

Symptoms

•Oil change light illuminated on the dashboard
•Maintenance reminder message displayed
•Vehicle maintenance schedule may be out of sync

Diagnostic Steps

1
Turn the ignition key to the 'ON' position without starting the engine.
2
Use the accelerator pedal to press down three times within ten seconds.
3
Observe if the oil change light blinks or turns off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Vehicle key or key fob

Parts Required

•None required for the reset process

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is parked on a flat surface.
Gather necessary materials: key fob and vehicle owner's manual for reference.

2. Turn Ignition On

Insert the key into the ignition or press the start button without pressing the brake pedal.
Turn the ignition to the "ON" position (not starting the engine).

3. Reset the Oil Change Light

Quickly press the accelerator pedal all the way down three times within ten seconds.
Watch for the oil change light to blink and then turn off, indicating a successful reset.

4. Verify Reset

Turn the ignition off and then back on to confirm that the oil change light has been reset.
Ensure the light does not remain illuminated.