how to reset the oil change light in Ford Explorer Fifth Generation (2011-2019)

Ford Explorer Fifth Generation (2011-2019)

Error Codes

5 minutes

Time

easy

Difficulty

low

Severity

2 min read

310 words

Problem Statement

Learn how to reset the oil change light in a Ford Explorer Fifth Generation (2011-2019) with this simple step-by-step guide.

Affected Component

Electrical

Estimated Time

5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is stationary and in 'Park' mode before performing the reset.

Symptoms

•Oil change light illuminated on the dashboard
•Maintenance required message displayed
•Engine oil change completed

Diagnostic Steps

1
Turn the ignition key to the 'On' position without starting the engine.
2
Press the accelerator pedal three times within 10 seconds.
3
Turn the ignition off.
4
Turn the ignition back to the 'On' position to verify the oil change light status.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is parked on a level surface and the engine is off.
Gather necessary tools: none required for this procedure.

2. Turn Ignition On

Insert the key into the ignition and turn it to the "On" position without starting the engine.
Ensure all dashboard lights illuminate.

3. Accelerate Pedal

Firmly press the accelerator pedal three times within 10 seconds.
Make sure to do this quickly for the reset to register.

4. Turn Ignition Off

Turn the ignition back to the "Off" position.
Wait for a few seconds before proceeding to the next step.

5. Verify Reset

Turn the ignition back to the "On" position.
Check to see if the oil change light has been turned off.