how to reset the Ford Explorer Fifth Generation (2011-2019) maintenance light

Ford Explorer Fifth Generation (2011-2019)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

360 words

Problem Statement

Learn how to reset the maintenance light on Ford Explorer Fifth Generation (2011-2019) after routine maintenance. Step-by-step guide included.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' or 'Neutral' before starting the ignition procedure.

Symptoms

•Maintenance light illuminated on the dashboard
•Notification message indicating service is due
•No engine performance issues associated with the light

Diagnostic Steps

1
Ensure the vehicle is in the 'On' position without starting the engine.
2
Navigate to the 'Settings' menu on the dashboard display screen.
3
Select 'Vehicle' settings from the menu options.
4
Look for 'Oil Life Reset' or 'Maintenance Reset' option.
5
Follow prompts to reset the oil change light.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None specifically required, but the owner's manual may be useful.

Parts Required

•None required for resetting the maintenance light.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Gather necessary tools such as the vehicle's owner's manual for reference.

2. Turn on the Ignition

Insert the key into the ignition or press the start button without pressing the brake pedal to turn on the electrical systems.
Ensure all dashboard lights illuminate (but the engine does not start).

Use the vehicle's control buttons or touchscreen to navigate to the "Settings" menu on the dashboard display.

4. Reset Maintenance Light

Select "Vehicle" from the settings options.
Find and select "Oil Life Reset" or “Maintenance Reset.”
Follow the prompts to confirm the reset. The maintenance light should turn off after confirmation.

5. Confirm Reset

Turn off the ignition and then restart the vehicle to ensure the maintenance light is no longer illuminated.