how to reset my Ford Explorer Fifth Generation (2011-2019) oil change light

Ford Explorer Fifth Generation (2011-2019)

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

366 words

Problem Statement

Learn how to reset the oil change light on your Ford Explorer (2011-2019) with this step-by-step guide. Quick and easy instructions for maintenance.

Affected Component

Electrical

Estimated Time

5-10 minutes

Important safety information - read before proceeding

•Ensure the vehicle is securely parked and the parking brake is engaged before performing this procedure.

1
Ensure the vehicle is in 'Park' and the ignition is turned to the 'On' position without starting the engine.
2
Locate the gas or brake pedal, as you will need to use it in the following steps.
3
Observe the dashboard for any warning lights that may need to be addressed before resetting.

After completing the repair, verify that the issue has been resolved:

To prevent this issue from occurring again:

No comments yet

Be the first to share your thoughts

Solution

1. Preparation

2. Turn on the Ignition

Insert the key into the ignition or press the start button without pressing the brake pedal to turn on the electrical accessories.
Ensure the odometer display is visible.

Press the gas pedal three times within ten seconds to enter the reset mode.
Observe the instrument cluster for a message indicating that the oil change light is being reset.

4. Confirm Reset

After the above step, check the display to confirm that the oil change light has been reset.
If necessary, turn off the ignition and restart the vehicle to ensure the light is off.