how to reset check engine light Ford Explorer Fifth Generation (2011-2019)

Ford Explorer Fifth Generation (2011-2019)

Error Codes

15-30 minutes

Time

easy

Difficulty

medium

Severity

2 min read

374 words

Problem Statement

Learn how to reset the check engine light on Ford Explorer Fifth Generation (2011-2019) with our step-by-step guide and diagnostic procedures.

Affected Component

Engine

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park or neutral with the parking brake engaged while working on the ignition system.

Symptoms

•Check engine light illuminated
•Potential error codes stored in the vehicle's computer
•Engine performance issues (if applicable)

Diagnostic Steps

1
Use an OBD-II scanner to retrieve any stored error codes.
2
Address any mechanical issues indicated by the error codes.
3
Clear the error codes using the OBD-II scanner.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner

Parts Required

•None required for the reset process.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Tools Required: OBD-II scanner
Ensure the vehicle is parked on a level surface and the engine is turned off.

2. Connect OBD-II Scanner

Locate the OBD-II port beneath the dashboard near the steering column.
Plug the OBD-II scanner into the port.

3. Power On the Scanner

Turn on the vehicle ignition without starting the engine (turn key to the "On" position).
Follow the scanner's instructions to power it on.

4. Retrieve and Clear Codes

Navigate to the "Read Codes" option and record any error codes for reference.
Select the "Erase Codes" option to reset the check engine light.
Confirm the action when prompted by the scanner.

5. Disconnect Scanner

Once the codes have been cleared, safely unplug the OBD-II scanner from the port.

6. Test Drive

Start the engine and take the vehicle for a short test drive to ensure the check engine light remains off.