how to fix P0700 transmission code in Ford Explorer Fifth Generation (2011-2019)

Ford Explorer Fifth Generation (2011-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

Error Code: P0700

3 min read

507 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0700 transmission code in Ford Explorer (2011-2019). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Error Code

P0700

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before opening the transmission fluid pan.

Symptoms

•Check engine light illuminated
•Rough or erratic shifting
•Delayed engagement when shifting from park to drive
•Transmission slipping or failing to engage
•Decreased fuel efficiency
•Transmission overheating

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any additional transmission-related codes.
2
Inspect the transmission fluid level and condition; low or dirty fluid could indicate issues.
3
Check the transmission wiring harness and connectors for damage, corrosion, or loose connections.
4
Verify the operation of the transmission control module (TCM) by testing its communication with the vehicle's PCM.
5
Perform a road test to observe transmission behavior under various conditions and note any abnormal shifting patterns.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Multimeter
•Transmission fluid pump
•Torque wrench
•Wire stripper/crimper

Parts Required

•Transmission fluid
•Transmission filter (if applicable)
•Transmission control module (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any additional transmission-related codes.
2
Inspect the transmission fluid level and condition; low or dirty fluid could indicate issues.
3
Check the transmission wiring harness and connectors for damage, corrosion, or loose connections.
4
Verify the operation of the transmission control module (TCM) by testing its communication with the vehicle's PCM.
5
Perform a road test to observe transmission behavior under various conditions and note any abnormal shifting patterns.

Solution

1. Preparation

Gather necessary tools and parts.
Disconnect the vehicle's battery to ensure safety while working on the electrical components.

2. Inspect and Replace Transmission Fluid

Tools Required: Transmission fluid pump, fluid catch pan, funnel.
Remove the transmission fluid pan using a socket set.
Drain the old fluid into a catch pan.
Inspect the fluid condition for metal shavings or burnt smell; replace if necessary.
Replace the transmission filter if applicable.
Refill with the manufacturer-recommended transmission fluid (consult owner’s manual for specifications).

3. Repair Wiring and Connectors

Tools Required: Multimeter, wire stripper/crimper, electrical tape.
Inspect the wiring harness visually for any signs of wear or damage.
Use a multimeter to check for continuity in the wiring.
Repair or replace damaged wires and connectors as necessary, ensuring secure connections.

4. Test and Replace Transmission Control Module (if needed)

Tools Required: OBD-II scanner, torque wrench.
If diagnostics indicate a faulty TCM, remove it according to manufacturer specifications.
Install the new TCM, ensuring all connections are secure.
Torque bolts to manufacturer specifications.
Reconnect the vehicle's battery.